1. Set the iron temperature dial (B) according to the type of material to be ironed.
2. The iron indicator light (C) comes on.
Caution : the generator and the iron are ready for ironing when the steam indicator light (M) and
iron light (C) go out.
3. Set the steam output (control dial (J) on the control panel).
● Synthetics (low temperature)
● ● Silk, Wool (medium temperature)
● ● ● Cotton, Linen (high temperature)
5 - STEAM IRONING
Set the iron temperature dial (B) and steam output dial (J) according to the type of material to
be ironed :
Type of material
Iron temperature setting Steam output setting
Synthetics
●
●
(Low temperature)
Silk, Wool ● ●
● ●
(Medium temperature)
Cotton, Linen ● ● ●
● ● ●
(High temperature)
4 - STARTING UP YOUR STEAM GENERATOR
Caution :
The first time the steam generator is used, there may be some fumes and smell but this is not
harmful. They will not affect use and will disappear rapidly.
1. Connect your steam generator to an earthed socket.
2. Press the 2 switches (K and L) on the control panel to start up the boiler and the iron. The steam
indicator light (M) on the button (L) lights up and the boiler starts to heat up. When the light (M) goes
off (after about 8 minutes), the steam is ready.
During ironing, the indicator light (C) on the iron and the steam indicator light (M) switch on and
off, according to heating requirements.
What type of water should be used?
Your appliance is designed to work with untreated tap water. However, if your water is very hard, mix 50%
tap water with 50% commercially available distilled or demineralised water.
What type of water should not be used?
Do not use tumble dryer condensate, scented water, softened water, refrigerator condensate, battery
water, air conditioner condensate, pure distilled water or rainwater; they contain organic waste or mine-
ral components that are concentrated by heat and cause spitting, brown staining or premature ageing of
your appliance.
