6
USING THE APPLIANCE
BEFORE USE
WHICH SPEED TO USE?
Ingredients Speed Approx. weight (in kg)
Quantity of juice
obtained in cl (*)
Apples 2 1 65
Pears 2 1 60
Carrots 2 1 60
Cucumbers 1 1 (about 2 cucumbers) 60
Pineapple 2 1 30
Grapes 1 1 45
Tomatoes 1 1,5 90
Celery 2 1,5 35
Uncorrect choice of speed can induce abnormal vibrations of the appliance
• We recommend that you wash all the
removable parts (A, C, D, E, G, L, M, N) in warm
soapy water (see cleaning §). Rinse and dry
them carefully.
• Unpack the appliance and then place it on a
flat, stable, heat-resistant work surface.
• Ensure that all packaging has been
removed before starting the appliance.
• Fit the juice collector (E) on the drive shaft (J)
(see Fig. 1).
• Place the sieve (D) in the juice collector (E).
Ensure that the sieve is correctly clipped onto
the drive shaft (J). You can hear an audible
click (see Fig. 2).
• Fit the cover (C) on the appliance, ejection
spout to the rear (see Fig. 3).
• Click the safety clamp (H) into place over the
cover (C) (see Fig. 4).
• Fit the pulp collector (G) on the rear of the
appliance (see Fig. 5).
• Slide the pusher (A) into the feed tube (B),
aligning the groove on the pusher with the
small ridge in the feed tube.
• If you wish to separate the juice from the froth,
slide the foam separator (M) in the juice jug (N)
and fit the cover onto the juice jug (see Fig. 6).
The foam separator allows you to keep the froth
into the juice jug when you pour the juice into
a glass.
• Position the juice jug (N) under the pouring
spout in front of the appliance as shown on
Fig. 7.
• Plug in the appliance. You can use the cord
storage (P) to adjust the length of the cord (see
Fig. 8).
• Start the appliance using the control switch (I).
• Insert the fruits or vegetables through the feed
tube (B).
• The fruits and vegetables must be inserted
while the motor is running.
• Do not press too hard on the pusher (A). Do not
use any other utensil. NEVER push with your
fingers.
• When you have finished, stop the appliance,
turning the control switch (I) to 0.
• When the pulp collector (G) is full, or the juice
flow slows, empty the pulp collector and clean
the sieve.
*
The quality and quantity of juice varies greatly according to the date of harvest and the particular variety of
fruits or vegetables. The quantities of juice indicated above are given as an indication.
