12
Re-fit the grey foam filter (16b) to the microfilter (16a).
Re-fit the microfilter cassette* in its compartment (16) - fig. 28.
Check that the microfilter cassette* (16) is fitted correctly before re-closing the lid (9).
Change the microfilter every 10 times you change the bag.
4. Clean the vacuum cleaner
Clean the housing of the vacuum cleaner with a soft and humid rag and let dry.
Clean the cover with a dry rag - fig. 29.
Do not use abrasive or aggressive products.
1. If your vacuum cleaner does not start
The appliance is not plugged-in, check that the appliance is correctly plugged in.
2. If there is no suction
An accessory or the tube is clogged. Unclog the accessory tube or flexible hose.
The lid was not closed properly: check that the bag is properly installed and close the lid again.
3. If the suction of your vacuum cleaner has dropped, it makes a noise and
whistles
An accessory or the flexible hose is partially clogged. Unclog the accessory tube or flexible hose.
The bag is full or saturated with fine dust. Put a new bag in or empty the fabric dust bag.
The foam-filter is saturated. Clean the foam-filter.
If the bag fill indicator is red, the filtration system is saturated.
- The Hepa* cassette: change the Hepa* cassette and put it back in its housing.
- Washable HEPA* filter cassette: clean or change the washable HEPA filter cassette and put it back in its housing.
- The microfilter cassette*: withdraw the microfilter from the cassette, and change it. Wash the grey foam filter, squeeze it
out and leave it to dry for at least 12 hours. Then re-fit the cassette in its housing.
The electronic variable suction power selector is in the minimum position.
Increase the power with the help of the electronic variable suction power selector (except if you are vacuuming delicate
fabrics).
If the mechanical power regulator on the power nozzle is open, close the mechanical power regulator.
4. If the bag fill indicator remains red
The bag is full: replace the bag or clean the bag*.
5. If the floor head is hard to move around
Open the suction regulator on the handle or reduce power.
6. If the power cable does not rewind completely
The power cable is slow in reentering its housing. Pull the cable back out and press on the automatic cable rewind pedal.
If you have any product problems or queries, please contact our customer Relations Team first for expert help and
advice.
This product has been designed for domestic use only. Any professional use, innapropriate use or failure to comply with the
instructions, the manufacturer accepts no responsibility and the guarantee will not apply.
Read the instructions for use carefully before using your appliance for the first time: any use which does not conform to these
instructions will absolve Moulinex from any liability.
TROUBLESHOOTING
WARRANTY
*Depending on model: it means special equipment for some models or optional accessories.
