20
WARNING
Turn o and unplug vacuum cleaner before performing maintenance to the vacuum cleaner.
Review this table to nd do-it-yourself solutions for minor performance problems. Any
other service needed should be performed by a qualied service dealer.
WARNING
Always turn o and unplug vacuum cleaner before performing maintenance to the vacuum
cleaner. Failure to do so could result in electrical shock or personal injury.
CLEANING THE ROLLER
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Vacuum cleaner won’t start
1. Battery needs charging
2. Tripped circuit breaker/blown
fuse at household service panel.
1. Plug in rmly, allow vacuum to
charge
2. Contact After Sale Service.
If the brush does not start The brush is blocked
Clean the brush and wait for
about 10 minutes before
restarting.
Poor job of dirt pick up
1. Full or clogged dust bin.
2. Clogged airow passages.
3. Dirty lters
1. Empty dust bin. (page 19)
2. Clear airow passages.
(page 19 & 20)
3. Change/Clean lters. (page 19)
1 • Using a penny or small
coin, turn the roller re-
lease screw counter-
clockwise.
2 • Lift and remove the roller
release latch.
3 • Pull the roller out by
pulling up on the right
side – Clean the roller
4 • Place the roller back into
the slots
5 • Place the roller release
latch back into the
proper position
6 • Lock by turning the
roller release screw
clockwise with a penny
or small coin.
