Bedienungsanleitung Moulinex Odacio (Seite 11 von 19) (Englisch)

481993

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Starting your appliance

Electronic model:

- Pulse (intermittent operation):

turn

the knob

(a6)

to the "Pulse" position

By pressing successively for better

control of some preparations.

- Continuous operation:

turn the knob

(a6)

to the "1" position.

- Stop:

turn the knob

(a6)

to the "0"

position.

- Speed variator (a5):

select the speed

indicated or vary it during the

preparation.

Two-Speed Model:

- Pulse (intermittent operation):

turn

the knob

(a7)

to the "Pulse" position

by pressing successively for better

control of some preparations.

- Continuous operation:

turn the knob

(a7)

to the "1" or " 2 " position

depending on the preparation

- Stop:

turn the knob

(a7)

to the "0"

position.

- Using the upper drive (a2):

check that no accessories are

attached to the lower drive.

ASSEMBLING THE REMOVABLE

PARTS

- Fitting / removing the bowl

(b3)

The bowl is used with the following

accessories (depending on model):

- Cutters

(e)

, vegetable cutters

(d)

whisk

(f)

, emulsifier

(g)

, citrus press

(h)

, centrifugal juice extractor with

filter basket

(m10)

"Maxipress"

(l)

- If it is not already fitted, fit the seal

(b3-2)

onto the bottom of the

bowl.The lip of the seal must be

facing upwards.

- Fit the drive rod

(b3-1)

onto the seal

(b3-2)

- Lock the assembly with the nut

(b3-3)

until it locks.

- Dismantle the assembly and clean it

after each use.

- Fitting / removing the handles (b4) of

the bowl and (k4) the blender

- For easier cleaning and storage, the

handle of the bowl

(b4)

and the

blender

(k4)

can be removed.

- To fit the handle, position it opposite

The functions of your food

processor

the clips of the bowl.

- Slide the handle upwards until it

clicks into place.

- To remove the handle, press the

release knob

(b4-1)

(k4-1)

and

slide it downwards.

(Note: the lid of the blender must be

removed to allow the handle

(k4)

be taken off.

The handle (b4) must be fitted to the

bowl so that the upper drive cover (a1)

may be locked

MIXING / BLENDING / MINCING /

KNEADING

ACCESSORIES USED

(depending on model)

- Bowl assembly

(b)

, spindle

(c)

, and

cutters

(e)

• metal blade

(e1)

for blending and

chopping.

• plastic kneader

(e2)

for kneading or

mixing.

FITTING THE ACCESSORIES

Press the release button (a4) to open

the upper drive (a1) cover.

- Place the bowl

(b3)

on the lower drive

(a3)

- Place the spindle

(c)

on the bowl drive

(b3-1)

- Slide the metal blade

(e1)

or the

plastic kneader

(e2)

onto the spindle

(c)

, to the bottom of the bowl.

- Place the ingredients in the bowl.

- Fit the lid

(b2)

(d4)

onto the bowl.

- Close the upper drive cover

(a1)

You should hear it "click" shut.

To release the cutters

(e)

from the

spindle

(c)

- Place the assembly on a stable surface.

- Turn the spindle

(c)

in a clockwise

direction while holding the cutter

(e)

the top.

Recommended speeds

Function

Electronic

Model

Two-Speed

Model

Mixing 3-4-5 1-2

Chopping 5-Pulse 2-Pulse

Kneading 5 2

Blending 5 2

Moulf43 27/07/07 8:40 Page 23

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Moulinex Odacio Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info