Bedienungsanleitung Moulinex QA4081 (Seite 16 von 104) (Alle Sprachen)

721107

Zoom out

Zoom in

Vorherige Seite

1/104

Nächste Seite

3.1 - FITTING THE MINCER ATTACHMENT

•Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place.

•Place the attachment (E) and lock it in the anti-clockwise direction such that the outlet is in alignment

with the appliance.

•Place the multi-function head (A3) in the horizontal position by pressing the button (a2) once again.

3.2 - ASSEMBLING THE MINCER HEAD

•Hold the body (F1) by the feed tube, with the wider opening uppermost.

•Insert the feed screw (F2) (long shaft first) into the body (F1).

•Fit the blade (F3) onto the short shaft protruding from the feed screw (F2) with the cutting edges facing

outwards.

•Fit the chosen screen (F4 or F5) on the blade (F3), aligning the two lugs with the two notches in the

body (F1).

•Screw the nut (F6) home on the body (F1) in the clockwise direction, without locking it.

•Check the assembly. The shaft should have no play, neither should it be able to turn on its own. Otherwise,

repeat the assembly procedure.

3.3 - FITTING THE MINCER HEAD ON THE APPLIANCE

•Facing the attachment outlet (E), insert the assembled mincer head (F) inclined to the right, aligning

the two bayonets in the mincer head with the two notches in the attachment. Push the mincer head

home into the attachment and turn the mincer head anti-clockwise until it latches with the feed tube in

the vertical position.

•Place the removable tray (F8) on the feed tube.

3.4 - USAGE, TIPS AND DISMANTLING

•Make sure that the safety cover (A5) is locked correctly (clockwise) on the high-speed outlet (a4).

•Place a container to collect the preparation in front of the appliance.

•Run the appliance by turning the selector (A1) to speed "3" or "4".

•Push the meat, piece by piece, down the feed tube, using the pusher (F7). Never push the ingredients

down the feed tube with your fingers or any other utensil.

- You can chop up to 3 kg of meat (gristle, bone and sinew removed).

- Maximum time of use: 10 minutes.

•Leave your appliance to cool down completely before using again.

•To stop the appliance, turn the selector to "0" speed and wait for the appliance to come to a complete

stop.

•Unlock the mincer head in the reverse order of the assembly.

Tips:

- Prepare all of the foodstuffs to be minced (for meat, remove the bones, gristle and tendons and cut it

into pieces of approximately 2 x 2 cm).

- Make sure that frozen meat is thoroughly thawed.

- At the end of the operation, you can feed a few small pieces of bread into the feed tube to clear any

meat remaining in the machine.

4 - GRATING / SLICING (DEPENDING ON MODEL)

ACCESSORIES USED :

- Attachment holder (E)

- Assembled vegetable slicer (G)

- Drums (depending on model)

4.1 - ASSEMBLING THE ACCESSORIES

•Press the button (A2) to release the multi-function head (A3) and raise it until it locks in place.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Moulinex QA4081 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info