Bedienungsanleitung Moulinex Solea Protect Timer BCD3 (Seite 9 von 33) (Holländisch)

4732

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

When cut off, this plug is a shock hazard if

inserted into a socket outlet and must

therefore be disposed of safely.

If the fuse cover is detachable, never use the

plug with the cover omitted. Replacement

covers can be obtained from your service

agent.

Fit the appropriate plug according to the ins-

tructions in paragraph «Fitting a plug». With

alternative plugs a 15 amp fuse must be fitted

either in the plug or adaptor or at the main

fuse box.

APPLIANCES WITHOUT FITTED PLUG

FITTING A PLUG - IMPORTANT

The wires in the mains lead are coloured in

accordance with the following code:

GREEN & YELLOW : EARTH

BLUE : NEUTRAL

BROWN : LIVE

As the colours in the mains lead of this

appliance may not correspond with the

coloured markings identifying the terminals in

your plug, proceed as follows:

The wire which is coloured GREEN &

YELLOW must be connected to the terminal

in the plug which is marked with the letter ‘E’

or by the earth symbol

or coloured green

or green and yellow. The wire which is

coloured BLUE must be connected to the ter-

minal which is marked with the letter ‘N’ or

coloured black.

The wire which is coloured BROWN must be

connected to the terminal which is marked with

the letter ‘L’ or coloured red.

This appliance is manufactured to conform to

the Low Voltage Electrical Equipment (Safety)

Regulations 1989 and is designed to comply with

BS 3456. It complies with the requirements of

the EEC Directive (89/336/EEC).

- This appliance must be used with an earthed

connection.

- If the power cable is damaged, do not use

the appliance. In order to avoid all danger,

have the cable replaced by the manufactu-

rer, its after-sales service, or similarly

qualified people.

- Do not let the mains lead hang loose within

reach of children.

- This appliance is for domestic use only.

- Never use the coffee pot in a microwave oven

for the models ACG2, ACG3, ACG4, ACG5.

Practical Hints

- Only fill the water tank with cold water.

- Always remember to replace the cover on

the coffee pot to ensure operation of the anti-

drip function.

- When using your coffee maker for the first

time, rinse the coffee pot and run the coffee

maker with a full tank of water but without

coffee grounds.

- Check there is no hot coffee left in the filter-

holder before removing it.

- The length of the mains lead can be adjusted

by pulling it or by pushing it into the

appliance.

Using the Coffee Maker

. USING THE COFFEE POT

You can prepare 15 small or 10 large cups of

coffee and keep the coffee warm on the hot

plate

- Fill the water tank (A) with cold water

following the water level indicator.

- Move the filter holder (C) to the side and pour

your coffee grounds into a no.4 filter

positioned in the filter-holder. Replace the

filter-holder.

- Place the coffee pot, with the lid in place, on

the hot plate (E).

- For models with flavour strength selector,

choose a normal

or strong

coffee

using the selector (G). Choosing the latter

setting will mean that the coffee will take lon-

ger to filter through.

- For the Duo model, set the selector (H) to

position

- Use the switch (F) to start the machine. The

red indicator will come on to show that the

coffee-machine is heating up.

- An anti-drip system allows you to remove

the coffee-pot for the necessary time it takes

to pour the coffee, while it is being made.

Replace the coffee pot quickly to avoid an

overflowing of the filter holder.

. USING CUPS (Duo model)

A switch on the filter-holder allows you to

choose coffee to be filtered into 1 or 2 cups.

The duo stand (I and J) supports the cups.

Slightly raised, it will avoid any splashes and

allow the coffee excess to be collected.

- Fill the water tank with cold water according

to the cups you are using (you can pour from

the cups directly to determine the quantity).

The Duo marking on the water level indicator

reminds you not to exceed the maximum

water level indicator.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Moulinex Solea Protect Timer BCD3 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info