Bedienungsanleitung MP Elite Power G645 (Seite 18 von 34) (Englisch)

575298

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

15 of 31

9.2. Hot-swap mobile rack (optional)

You can connect an additional external hard drive using the hot-swap mobile rack.

PLEASE NOTE!

Please note that only the above-mentioned mobile rack may be used.

10. The optical drive (optional)

10.1. Load disc

ATTENTION!

Do not use scratched, broken, dirty or poor quality discs. Do not stick protective film or other adhesive labels to the discs.

The high speeds in the drive can cause these to break destroying your data and damaging your device. Inspect discs

carefully before inserting them. If damage or dirt is visible, do not use the disc. Damage caused by faulty media is not

covered under warranty and repairs will be chargeable.

 Press the eject button on the optical drive to open the drawer.

 Insert the disc into the drawer, label up, so that it lies flat.

 Check that the disc can turn freely and then carefully slide the drawer back into the optical drive until it clicks into place.

On delivery, your optical drive is assigned the drive letter “E”. You can easily access the data on your discs using Windows

Explorer (Computer). Run Windows Explorer using the shortcut on the taskbar or by simultaneously pressing the Windows

key and the “E” key. When accessing DVD videos (or audio and video files on conventional data CDs), the preinstalled me-

dia player is used automatically.

 If you wish to remove a disc, press the eject button.

ATTENTION!

Do not try to remove the disc from the drive while the PC is accessing the optical drive.

10.1.1. Removing the disc

 To remove the disc, press the eject button again.

 Take the disc out and place it in a CD case.

 Close the drive again.

10.2. Playing/reading discs

PLEASE NOTE!

Many discs run automatically when they are inserted. This depends on the operating system and the relevant settings.

Your PC is capable of playing audio CDs, DVD movies or data discs from the optical drive.

Once a disc has been loaded, a dialogue box opens containing various playback options. Normally, there will be a number of

different options available.

Playback of DVD film titles includes decoding MPEG2 video, digital AC3 audio data and decoding CSS-protected content. CSS

(sometimes also referred to as Copy Guard) is the name of a data protection program used by the film industry to protect

against illegal copying. Among the many controls for CSS licensees, the most important of the playback restrictions involve

country-specific content. To make it easier to create geographically separate film releases, DVD titles are coded for specific re-

gions. Copyright laws required that each DVD film be limited to a specific region (usually the region where it is sold). DVD film

versions can be published in multiple regions but CSS rules require that each CSS decoder system may only be used for one

region.

ATTENTION!

The region setting can be changed up to five times via the viewing software before the last setting becomes perma-

nent. If you then wish to change the region setting again, this must be carried out by the manufacturer. Any shipping

and configuration costs must be borne by the user.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MP Elite Power G645 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MP Elite Power G645

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info