Bedienungsanleitung MPF Drive System (Seite 9 von 18) (Deutsch, Englisch)

803722

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

CONTROL UNIT LW ( LIGHT WEIGHT )

SYSTEM START/ ON:

Press ON/OFF button 1 for 1 second - LED POWER lights blue 4 .

System is ready under first support level.

CHANGE SUPPORT LEVEL:

By pressing Mode button 3 support level will be changed.

Different support levels will be indicated by different appearance of the green

Mode LED 5 :

Mode 1 : Mode LED 5 appears in constant green light.

Mode 2 : Mode LED 5 appears in low speed flashing green light.

Mode 3 : Mode LED 5 appears in high speed flashing green light.

SYSTEM STOP/ OFF:

Press ON/OFF 1 button by 3 seconds – LED Power disappears. System turns off

automatically if not used for more than 3 minutes.

Technical modifications, changes and errors excepted

www.mpfdrive.com 13

Technical modifications, changes and errors excepted

www.mpfdrive.com 14

HOW TO RIDE

The MPF DRIVE supports you when riding, as long as you step into the pedals.

Without pedaling, there is no assistance.

The motor output always depends on the amount of your pedaling power.

When applying less pedaling power, the motor support will be lower than when

applying heavy power.

The motor support automatically switches off when the e-Bike succeeds its legal

speed threshold (25 or 45 kph). When the speed again falls below the threshold,

the motor support will be applied again on demand.

You can also ride the bike like a normal bicycle without motor assistance.

Either switch off the motor system or set the support level to “zero”.

Change the gears according to your actual riding situation and chose a lower gear

for low speed and a higher for high speed. To support your gear shifts you may use

the gear shift indicator on the AF Display. By selecting the right gear, you can

increase the speed and range with the same pedaling effort.

To make changing gears easier and to reduce its wear, it is recommended to briefly

interrupt the pedaling while changing gears.

An exception applies to the push assistance (BOOST) function, in which the e-Bike

can be pushed at low speed without pedaling.

The pedals may also rotate when the push assistance is used.

WHAT WILL INFLUENCE THE RIDING RANGE

The operating range depends on many factors, such as:

– Chosen assistance level

– Gear-switching behavior

– Type of bicycle tires and tire pressure

– Age and condition of the battery

– Route profile (inclines) and road or path conditions (road or path surface)

– Head wind and outer temperature

– Weight

Unfortunately it is therefore impossible to precisely predict the range before

commencing a trip.

General rules:

– For the same motor output of the MPF DRIVE: The less power or force that you

have to bring about to reach a certain speed (e.g. through optimal use of the gears),

the less energy the e-Bike will consume, and the greater the range for one battery.

– The higher the assistance level under same conditions,the lower the range.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MPF Drive System Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info