Bedienungsanleitung Mpman DAB200 (Seite 28 von 32) (Deutsch, Englisch, Französisch, Italienisch)

493931

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

DAB auto tune modes

There are two types of auto scan modes, one is local auto scan and the other is full auto scan. Local auto scan will

only search for the UK DAB Band III channels and full auto scan will search for all DAB Band III channels. After the

scan has finished, the first alphanumerically found station will be automatically selected.

1. To activate the local auto scan, press the MENU button to enter into the Tune Select Menu and then press

the ▲ or ▼ button to select “Local scan”, then press the SELECT button to confirm, the display will show

“Scanning …” and a quick progressing slide bar. (F.4)

2. To activate full auto scan, in the Tune Select Menu, press the ▲ or ▼ button to select “Full scan”, then press

the SELECT button to confirm, the display will show “Scanning …” and a slower progressing slide bar. (F.5)

3. All the stations that have been found will be stored automatically, to explore the found stations, press the ▲

or ▼ buttons and then press the SELECT button when you find a station that you would like to listen to.

DAB manual tune

1. To select manual tune, first press the MENU button to enter into the Tune Select Menu, then press the ▲ or

▼ buttons to select “Manual tune”, finally press the SELECT button to confirm. (F. 6)

2. Press the ▲ or ▼ buttons to move through the DAB channels, the display will show “5A to 13F” and their

associated frequencies. (F. 7)

3. When your desired frequency appears in the display, press the SELECT button to confirm. The name of the

station group (ensemble/multiplex) will be displayed.

4. To listen to the station selected, press the SELECT button again.

DAB secondary services

On some occasions you will see a “>” symbol directly after the name of the station, this indicates that there are

secondary services available to that station. These secondary services contain extra services that relate to the

primary station. E.g. a sports station may want to add extra commentaries. The secondary services are inserted

directly after the primary station.

DAB display modes

Every time you press the DISPLAY/INFO button, the display will cycle through the following display modes:

Time/Date

Ensemble/Multiplex (Group name)

Frequency

udio Bit Rate

Signal strength

DLS

Programme Type

Time and date

The time and date will be automatically updated by the broadcasted information; it is no need to set the clock

manually. In the unlikely event that no clock information is received, the display will show “[No Time]”.

Frequency

The frequency of the present station will be displayed.

Audio bit rate

The display will show the digital audio bit rate being received.

DLS

DLS stands for Dynamic Label Segment which is a scrolling message that the broadcaster may include in their

transmissions. The message usually includes information such as programme details …etc.

Signal strength

The display will show a slide bar to indicate the signal strength, the stronger the signal, the longer the bar will be

from left to right.

UK-3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mpman DAB200 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info