Bedienungsanleitung Mpman ICR300 (Seite 2 von 6) (Englisch)

493956

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

TO TURN UNIT ON TO TURN UNIT OFF

SET SOUND QUALITY *Factory setting is “HP”

There are 4 recording quality for your choice,

For best sound quality, select HP(High Play); 5.5 hours recording.

For good sound quality, select MP(Medium Play); 8 hours recording.

For normal sound quality, select SP(Standard Play); 16 hours recording.

For longer recording time, select LP(long Play); 50 hours recording.

SET TIME AND DATE

When batteries are insert, 06y 1M 01D 12:00:00 will be on LCD.(Date mode.)

SET MIC SENSITIVITY SET VOICE

ACTIVATE(VOX)

SELECT A FILE FOLDER. (A,B,C,D)

There are 4 file folders(A,B,C,D)for your recording.

Each file folder can store 99 messages, and you can save 396 messages total

on the unit.

Use SD card. HOLD and Volume

Note: When you use SD card for playing/Recording, you must set SD card “On” each time

after inset SD card, (SD card i-con is on LCD.) *If there is no SD card in unit, it cannot be

“On” for SD card.

NORMAL RECORDING

*To turn LCD on, press PLAY

key once.(Time & Date on LCD/

Date mode.)

*Then, To power unit on, press

MODE key once.(ICR mode is

n LCD). o

To turn unit off, At ICR mode, press

and hold PLAY key more than

2seconds. LCD will be Displayed

time & date. (Date mode.)

* Unit will be off LCD after 60

seconds without any action.(Auto

ower off.) p

MODE

To enter Set Mode. When ICR

mode,. press and hold MODE key

more than 3 seconds.

SET is displayed on LCD. Use (←)or

(→) key to select 1 recording quality.

To confirm, press Play key then

press Mode key to back.

To confirm the setting, press

PLAY key and then Press

MODE key to back.

To choose setting item,

First, enter Set Mode.

Then, use (↑)or(↓)key first to

select mode, then use (←)

or(→)key further setting.

OPERATION

(

CONTINUED

)

MODE

To enter SET mode, press and

hold MODE key, then press

down key (↓)till time and date

on LCD.

①Select Year(Y) and set with

(←) or(→).Then press PLAY key

to confirm. ② Select month(M)

and set with ( ← ) or( → ).Then

press PLAY key to confirm.

③Select Date(D) and set with

(←) or(→).Then press PLAY key

to confirm. ④Select Hour

and set with (←) or(→).Then

press PLAY key to confirm.

⑤Select Minute and set with (←)

or(→).Then press PLAY key to

confirm.

*Press MODE key to back.

In set mode, press down Key(↓)

till MIC setting. Then press

(←)or(→)key to LOW or HI. Press

PLAY key to confirm then press

MODE

In set mode, press down key(↓)

till VOX appeared on LCD. Set

VOX on or off with (←)or(→)key.

Press PLAY key to confirm the

key to

back.

key to back.

*LOW for sounds near by unit;

*Hi for sounds far from unit.

*Factory setting is “HI”

setting then press MODE

*Factory setting is “Off”

OPERATION

(

CONTINUED

)

OPERATION

(

CONTINUED

)

OPERATION

(

CONTINUED

)

NOTE:

Each time you record a

message, the unit will assign

number automatically

The file number will be

shown on LCD.

*If the units is full, FULL will be

appeared on LCD. Delete

same messages and you can

ecord again. r

Power on unit, press FILE/REP

key to select 1 to record

message.

*Factory setting is “A”

HOLD

VOL

SD car d: ON/ OFF

To use SD card,

insert SD card first. Long press

MODE key to enter Set Mode.

Then use (↑)or (↓)key

till

logo appeared on LCD.

Select ON with (←)or(→)key.

Press PLAY key to confirm and

press MODE key to back. SD

card

is recording storage media.

HOLD key and VOL key on right

side on unit.

*If unit doesn’t work, check

HOLD key off.

*If there is no sound even unit is

working, volume up slowly.

OPERATION

(

CONTINUED

)

Make sure VOX set OFF. Turn

unit on, and select sound quality

(HP,MP,SP,LP)

*Factory setting is “Off”.

Select a File Folder to record

with FILE/REP key

*Factory setting is “A”

REMAI N

To see remain recording time.

Press PLAY/STOP button while

Recording. ’REMAIN’ appeared

and remain recording time on

LCD for 3sec.

*While recording, press II/DEL

key for pause, and press the key

again to start recording.

ower on unit(ICR mode), and

press REC/STOP key once. LED

light on and start recording. New file

# & recording time are on LCD.

To stop recording, press

REC/STOP

Key again. *When you use external

microphone, put it into mic. Jack on

unit.

NOTE:

* Recording level is automatically sets by unit..

* To record another message, simply press REC/STOP key, Message(file) number

will increase one by one.

* For normal voice recording, distance of 5-9 inches is appropriate.

Do not remove the batteries while recording or otherwise interrupt the recording

process. Doing so may result in lost or damaged recording files. Unit will take a

few minutes to resume normal operations.(the display will read “LOAD” until normal

function resumes.).In order to protect your voice recordings, it is good practice to

regularly save backup copies or your recordings(

see the PC Connection & Software section

of this manual for more information).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mpman ICR300 Seite 2

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mpman ICR300

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info