Using the Remote Control
Point the remote at the remote sensor of the photo frame at a distance of no more than 10ft and at an angle no greater than 45 degrees.
Do not spill water on the remote control.
Do not use the remote control for other equipment at the same time.
Installing a Battery in the Remote Control
The remote control requires one “CR2025” battery. To load a battery in the remote:
1. Slide the compartment out in the direction of the arrow.
2. Place the battery in the compartment with the positive side (+) facing up.
3. Push the compartment in to close.
Inserting a Memory Card
This unit accepts microSD or microSDHC memory cards. Insert a memory card into the microSD card slot to:
Increase the memory capacity of your player
Play media files stored on the memory card (e.g., music, video, or photo files).
To insert a memory card:
1. Align the memory card with the card slot. The metal contacts of the memory card should face up towards the LCD screen.
2. Slide the card into the spring-loaded slot. Push the card in until it clicks into place.
Do not attempt to insert objects other than a microSD or microSDHC memory card into the card slot. A compatible memory card
should fit easily into the card slot; if you encounter resistance, check the alignment of the card. Do not attempt to force the card in.
Avoid touching the gold contacts of the memory card.
To release and remove a memory card:
1. Push the card further into the slot until you hear a click. The card will spring out of the slot.
2. Grasp the card by its edge to remove it.
To avoid damage and data corruption, do not remove a memory card while data is being being written to or read from the card.
For example, do not remove a card while playing a music file stored on the card.
