Getting started
Get to grips with the basics, and have your PC up and running in no
time.
Insert the memory card
Use only compatible memory cards approved for use with this
device.Incompatible cards may damage the card and the device
and corrupt data stored on the card.
Tip: Insert the memory card into the TF card slot of your PC.
The PC must be switched off before inserting the memory card.
Your PC supports memory, cards with a capacity of up to 32 GB.
For best performance,use a card with a capacity of 4-32 GB.
Charging your PC
Your battery has been partially charged at the factory, but you may
need to recharge it before switching the PC on for the first time.
Make sure you use a compatible USB charger to charge your PC.
1. Plug the DC charger into a wall outlet, then connect the end of the
cable to your PC.
2. When the battery is full, disconnect the charger from the PC, and
then disconnect it from the wall outlet.
You don't need to charge the battery for a specific length of time
and you can use the PC while it's charging.
When you start charging a completely empty battery, the start key
“WINDOWS” flashes until the screen wakes up and the charging
progress is shown.
If the battery is completely discharged, it may need to charge for up
to 20 minutes before the PC can be used.
The charging indicator may not be displayed in this time.
