Bedienungsanleitung Mpman XRM62i (Seite 10 von 53) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

493939

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

UK-1

To achieve the utmost in enjoyment and performance, please read this manual carefully before attempting to operate the unit in order to

became familiar with its features, and assure you years of faithful, trouble free performance and listening pleasure.

mportant Notes

* Keep instructions the safety and operating instructions should be retained for future reference.

* Avoid installing the unit in locations described below:

Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.

On top of other stereo equipment that radiate too much heat. Places lacking ventilation or dusty

places. Places subject to constant vibration. Humid or moist places.

* Make sure not to obstruct the ventilation openings.

* Before turning on the power for the first time, make sure the power cord is properly installed.

* Mains plug is used as the disconnect device and it shall remain readily operable completely

* The product shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on the

product.

* The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on

apparatus.

* To be completely disconnect the power input, the mains plug of apparatus shall be disconnected from the mains.

* When the stand-by LED gives no color

, the apparatus is completely disconnected from mains.

* Minimum distances10cm around the apparatus for sufficient ventilations.

* Attention should be drawn to the environmental aspects of battery disposal.

* The use of apparatus in moderate climates.

* The mains plug should not be obstructed or should be easily accessed during intended use.

* The ventilation should not be impeded by covering the ventilation openings with items such as newspaper

, table-clothes, curtains etc.

* No naked flame sources such as lighted candles should be placed on the apparatus.

* Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

For safety reasons, do not remove any covers or attempt to gain access to the inside of the product. Refer any servicing to qualified

personnel.

Do not attempt to remove any screws, or open the casing of the unit; there are no user serviceable parts inside, refer all servicing to

qualified service personnel.

CAUTION : TO REDUCE TH

E RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK),NO USER SERVICEABLE PARTS

INSIDE, REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

DANGEROUS V

OLTAGE

Conductor dangerous voltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present

within this products enclosure.

ATTENTION

The owners manual contains important operating and maintenance instructions, for your safety, it is necessary to refer to the

manual.

ARNING : TO PREVENT FIR E OR SHOCK HAZARD, DO NOT EXPOSE THI S APPLIANCE TO DRIPPING OR SPLASHING.

Note:

- This unit will become warm when used for a long period of time. Th is is normal and does not indicate a problem with the unit.

- The CD player includes micro-processors which may malfunction as a result of external electrical interference or noise. If the CD

player is not working properly

, disconnect the power source and then reconnect it.

- Excessive sound pressure from earphones and headphones can cause hearing loss.

- If an unusual conditions occurs in the display window or key button, switch the unit of

f, then turn on the unit again.

Assembly Drawing of Unit and speaker

1. Fixing the whole set of the unit on the wall

84 mm

Press down and push the stand panel of the buckle A

and B on the rear of the each speaker, and then each

stand of the speaker will remove from them.

Parallel the two nails that fix into the wall, the distance of them

should keep in 84mm.Note : The size of the nail : 3.5*25BA.

Parallel the two nails that fix into the wall, the

distance of them should keep in 300mm.

Note : The size of the nail : 3.5*25BA.

300 mm

Press down and push the stand panel of the

buckle C and D on the rear of the main unit, and

then the stand of the main unit will remove from it.

Note: When wall-mounting the set of product in line, suggest keeping at

least 50mm distance from the main unit to the speakers to achieve better

stereo effect and to ensure the slide CD door with prefect movement.

50 mm

2. Speakers connection

3. Docking bracket and iPod Adjusting pad panel

Universal Dock adapter (Using the Dock Adapters to support all type

of the iPod players.)

Connector dock

iPod Adjusting Pad

Panel(Press the iPod

Adjusting pad panel

lightly out from the

lock holder.)

iPod Adjusting Pad

Panel (Let theiPod

Players easy to

insert into the connector

fixedly, and then press

and push them toward

the lock holder until it

snaps on.)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mpman XRM62i Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info