Bedienungsanleitung Mr Coffee CGX7 (Seite 4 von 12) (Englisch, Spanisch)

646228

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

To Set the Delay Brew Time:

After setting the clock, simply press and hold the SET DELAY button

(Figure 1), and set the brew time by pressing the HOUR and MINUTE

buttons. The PM indicator will display when a PM hour is shown.

NOTE: To activate the DELAY BREW cycle, see the “Brewing

Coffee Later” section.

To check the programmed time, push the SET DELAY button. The

display will show the time you have programmed the coffee to brew.

PREPARING FOR USE

Selecting and Measuring Ground Coffee

For best results, use a level tablespoon for ground coffee measurement.

Make sure you use medium grind coffee for a perfect brew.

Suggested Coffee Measurement Chart

To Brew Ground Coffee

5 Cups 6 tbsp.

2 Cups 3 tbsp.

Adding Water and Ground Coffee

1. Lift and open the coffeemaker lid. For your convenience, you can

lift out the removable ﬁlter basket.

2. Place a MR. COFFEE

brand 4 cup paper basket-style ﬁlter or a

MR. COFFEE

permanent ﬁlter into the removable ﬁlter basket.

(Figure 2)

NOTE: If using paper ﬁlters, it is important that the sides of the

ﬁlter ﬁt ﬂush against the side of the ﬁlter basket. If ﬁlter collapse

occurs, dampen the ﬁlter before placing in the ﬁlter basket and

adding ground coffee and water.

3. Add the desired amount of coffee and gently shake to level the

coffee. See the Suggested Coffee Measurement Chart.

4. Be sure the ﬁlter basket is properly centered and all the way

down in the ﬁlter basket.

5. Fill the decanter with cold, fresh water to the desired capacity (1 cup equals 5 ounces). For

easy and accurate ﬁlling, the water markings on the glass decanter and on the dual water

windows show the amount of water needed to make the corresponding desired number of

cups. Do not ﬁll past the “MAX line” or water will ﬂow out of the overﬁll hole in the back of

the water reservoir.

The amount of coffee brewed will always be slightly less than the amount of

water poured in the water reservoir. This is due to the minimum absorption

of water by the coffee grounds.

6. Pour the water into the water reservoir. Close the lid and place the empty decanter onto the

warming plate.

NOTE: Make sure the decanter is fully placed on the warming plate or the water

and the grounds will overﬂow from the ﬁlter basket. An overﬂow may cause personal

injury or damage to property.

CAUTION! To reduce the risk of damaging the decanter and/or the risk of personal injury, do

not add cold water to the decanter if the decanter is already hot. Allow the decanter to cool

before using.

1 level tablespoon (tbsp) = 5 gr./0.17 oz.

1 cup = 5 ﬂ. oz. of brewed coffee

Use more or less coffee to suit your taste

(Figure 1 – Set Delay)

(Figure 2 – Adding water

and ground coffee)

BREWING COFFEE NOW

1. Press the ON Button to begin the brewing cycle. The green indicator light will turn on to signal

that the coffeemaker is brewing. When the brewing cycle

is complete the coffeemaker switches over to the warming mode.Your coffeemaker will keep

your coffee hot for 1 hour, then automatically shut off. To turn the coffeemaker off, push the

OFF button.

While the coffee is brewing, the Pause ’n Serve feature allows you to sneak a cup of coffee

from the decanter. REPLACE THE DECANTER ON THE WARMING PLATE WITHIN 30 SECONDS

TO PREVENT OVERFLOW AND POSSIBLE INJURY.

If the brew basket overﬂows or fails to empty into the decanter, do not

open the brew basket. Turn off the coffeemaker. Unplug the coffeemaker

and wait for the contents to cool before handling.

2. After the used coffee grounds have cooled, carefully discard them.

3. Make sure the decanter is empty before starting to brew coffee.

4. Be sure to turn your coffeemaker off when no longer using it.

BREWING COFFEE LATER

1. You must ﬁrst set the time when you would like the coffeemaker to begin brewing your coffee

as described in “Setting the Clock and the Delay Brew Timer” section.

2. Prepare your coffeemaker as described in “Adding Water and Ground Coffee” section.

3. To activate DELAY BREW and program your coffeemaker to brew coffee at a later time, press

the Delay Brew button. The DELAY indicator will appear on the digital display.

The coffeemaker is now set to automatically brew coffee at the pre-set later time.

4. At the pre-set time the DELAY indicator will go off, indicating that brewing has started.

5. The coffeemaker warming plate will keep your coffee hot for 1 hour and then

automatically turn off.

As a safety feature, your coffeemaker will NOT start again automatically the next day.

If you want your coffee to brew at the same time the following day, simply add a

new ﬁlter, coffee and water and set DELAY BREW, by repeating Steps 2 and 3 above.

To cancel DELAY BREW: Press the OFF button. The DELAY indicator will disappear.

English 5 English 6

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mr Coffee CGX7 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info