Bedienungsanleitung Mr Handsfree Blue Vision II (Seite 6 von 12) (Englisch)

493841

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

GB - 3

20. Digital keypad

21. Memo card

22. Memo card protection film

23. Removable battery insulation film

24. Lithium-Polymer battery

25. Battery cover

26. Infrared transmitter

GETTING STARTED

The mr Handsfree Blue Vision II is compatible with most Bluetooth

mobile phones.

Since devices with Bluetooth

technology communicate through radio waves, your carkit and your mobile phone do not need to be in

direct line-of-sight. The 2 devices only need to be within a maximum of 10 meters of each other, so you do not need to take your phone

out of your pocket or bag to make and receive calls via the carkit.

Since Bluetooth

phones produced by different manufacturers provide various functionalities; some functions described in this user’s

manual could be different or may not be available.

ACTIVATING THE REMOTE CONTROL

Open the battery cover (25) and take out the insulation film (23). J Install the battery (24) with observance of polarity. J Close the

battery cover (25). Now the remote control is ready to use.

Important!

The remote control and the carkit are connected via an infrared channel. Please make sure that the infrared transmitter (26)

and the receiver (12) are directed towards each other during operation.

CHARGING THE BATTERY

The mr Handsfree Blue Vision II comes with a Lithium-Polymer rechargeable battery. The battery is charged preliminary, but neverthe-

less we recommend charging it before using the carkit for the first time.

Plug the adapter jack into the charging socket (9) and the cigarette plug into the cigarette lighter. J The battery status indicator (11) will

light red or green when the charging process begins. J If the indicator (11) lights red, the carkit should be charged until the indicator

(11) will light green. J Unplug the vehicle charger from the carkit.

Note:

• You can use the Blue Vision II during the charging process.

• The Blue Vision II is compatible with Nokia mobile phone travel chargers. So you can use them to charge the Blue Vision II at home.

TURNING THE CARKIT ON/OFF

To turn on the carkit, press and hold the Power button (4) for 5 seconds until the battery status indicator (11) will light green and you

will hear a melody tone. J The battery status indicator (11) will start to flash. J To turn off the carkit, press and hold the Power button

(4) until you will hear a melody tone and the battery status indicator (11) will turn off.

INSTALLATION

MAIN UNIT

On the sun visor: Fix the main unit on the sun visor using the special clip (c) and direct the microphone beam (8) to your mouth. This

is the main working position of the microphone beam: the microphone beam should be rotated from the main unit and its end should

be directed to your mouth.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Mr Handsfree Blue Vision II Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Mr Handsfree Blue Vision II

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info