Bedienungsanleitung Mr Safe KB-333 (Seite 1 von 3) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

742005

Zoom out

Zoom in

Vorherige Seite

1/3

Nächste Seite

ILLUSTRATIONS

DECLARATION OF CONFORMITY

CONTENT OF PACKAGING

Kinec push buon + 230V Receiver + Mobile Receiver + Industrial tape + Screws + Plugs

PARTS & BUTTONS

1. Kinec Push Buon

A: Doorbell buon

INSTALLING AND PAIRING THE KINETIC PUSH BUTTON

You can aach the Kinec Push Buon to any surface using the supplied industrial tape and screws.

Take the plasc plate with the 2 screw holes and hold it against the wall you wish to aach it to. By

using a pencil, indicate where you need to drill the holes. Drill 2 holes where the indicaon is visible.

Insert 2 plugs into the holes, place the plasc plate in the correct locaon and screw it in place. To nish,

put one side of the the Industrial tape on the plasc plate and sck the Push Buon on the other side.

You can pair mulple push buons (oponally available on www.mrsafe.eu) with the receivers.

INSTALLING AND PAIRING THE 230V RECEIVER

You can plug the 230V Receiver into any socket in your house, the pairing for your set has already been

done during producon.

To pair an extra 230V Receiver with your Push Buon (oponally available on www.mrsafe.eu), put the

Receiver into a power socket to turn it on, the receiver is now in pairing mode for 2 minutes. Press the

Doorbell buon (A) once. You will hear a sound nocaon and see a red light on the 230V Receiver to

indicate that your devices are paired.

Up to 8 Push Buons can be saved on one receiver. If you aempt to add a ninth, the rst one will be

deleted. 1 Push Buon can be connected to an unlimited number of receivers.

INSTALLING AND PAIRING THE MOBILE RECEIVER

Before installing the Mobile Receiver, insert 3x AA Alkaline baeries into the Baery Compartment

(F). Open the cover of the baery compartment. Insert 3 AA Alkaline baeries according to the visible

scheme and close the cover. You can take the Mobile Receiver anywhere in your house (up to 100 m),

the pairing for your set has already been done during producon.

To pair an extra Mobile Receiver with your

Push Buon

(oponally available on

www.mrsafe.eu

you

should turn on the Mobile Receiver by sliding the ON/OFF switch (E) in the ON posion, the Mobile

Receiver is now in pairing mode for 2 minutes. Press the Doorbell buon (A) once. You will hear a

sound nocaon and see a red light on the Mobile Receiver to indicate that your devices are paired.

Up to 8 Push Buons can be saved on one receiver. If you aempt to add a ninth, the rst one will be

deleted. 1 Push Buon can be connected to an unlimited number of receivers.

SELECTING A RINGTONE AND ADJUSTING THE VOLUME

To select a ringtone on either the 230V Receiver or the Mobile Receiver, press the Tone selecon buon

of the device (C, G) unl you hear the ringtone you wish to select.

Note: If you wish to have the same ringtone on both devices, you have to set it for each device separately.

Note: When mulple Kinec Push Buons are paired to your device, it is not possible to have a separate

sound for each Push Buon.

To adjust the volume on either the 230V Receiver or the Mobile Receiver, rst, press the Tone selecon

buon of the device (C, G) to hear a tune and press the Volume buon of the device (D, H) to select

the desired volume.

SUPPORT

For more informaon, technical quesons and return requests concerning this product, you should

contact support@mrsafe.eu.

WARRANTY

Mr Safe is a registered trademark of TE-Group NV. The mr Safe brand stands for superior product

quality and outstanding customer service. That is why mr Safe warrants this product against all defects

in material and workmanship for a period of two (2) years from the date of original purchase of

the product. The condions of this guarantee and the extent of responsibility of mr Safe under this

guarantee can be downloaded from our website: www.mrsafe.eu.

2. 230V Receiver

B: Power Plug

C: Tone selecon buon

D: Volume buon

3. Mobile Receiver

E: ON/OFF switch

F: Baery Compartment

G: Tone selecon buon

H: Volume buon

Hereby, Par la présente,

Company /Entreprise:

Address: / Adresse:

declare that the following equipment: / déclare que le disposif suivant :

Product name:

Nom du produit:

Product type:

Type de produit:

conforms with the following safety requirements of the direcves 2011/65/EU, 2015/863/EU, 2014/53/EU.

Conformity is guaranteed by the CE-symbol. This product has been tested against following standards and

specicaons, applying versions valid in April 2020. The full text of the EU declaraon of conformity is available

at the following internet address:

hp://www.mrsafe.be/DOC_KB-333.

est conforme aux exigences de sécurité suivantes des direcves 2011/65/EU, 2015/863/EU, 2014/53/EU. La

conformité est garane par le symbole CE. Ce produit a été testé par rapport aux normes et spécicaons suivantes,

appliquant les versions valides en Avril 2020. Le texte complet de la déclaraon UE de conformité est disponible à

l’adresse internet suivante:

hp://www.mrsafe.be/DOC_KB-333.

EN62321-1,2,3,4,5,6,7,8:2015

EN62368-1+A11:2017

EN330220-2 V3.2.1

EN301489-1 V2.2.3

EN301489-3 V2.2.3

EN62479:2010

J. Van Os, Product & Research Manager

Authorized Signature, Kapellen - April 2020

TE-Group NV

Kapelsestraat 61, 2950 Kapellen, Belgium

mr Safe KB-333

Wireless Kinec Doorbell Set

WWW.MRSAFE.EU

KB-333

EASY TO INSTALL

USES THE WIRING &

ADAPTER OF YOUR

CURRENT DOORBELL

FREE APP

FOR IOS &

ANDROID

DEVICES

BATTERY FREE

KINETIC DOORBELL SET

SENDER

230V RECEIVER

MOBILE RECEIVER

USER MANUAL

NL DFR

Mr Safe KB-333 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info