779187
33
Zoom out
Zoom in
Vorherige Seite
1/165
Nächste Seite
The unit is delivered almost ready, and only the wheels and the feet need to be
mounted (see above pictures).
First, put the wheel with the protruding part of the rim on the unthreaded side of
the axle shaft, and on the other side secure the rim by first putting a washer on it
and then inserting a clip up to the head in the hole at the end of the axle shaft. Bend
the ends of the pin protruding from the other side of the hole around the axle to
protect the wheel against falling off.
Repeat the operation for the second wheel. The wheels assembled in the way with
half-shafts should be fixed in the holes provided in the frame of the unit, securing
them from the inside of the unit with washers and flange nuts.
In order to assemble the feet, first fix the rubber stoppers to the U-shaped brackets
with 2 bolts and flange nuts.
Then attach the feet prepared in such a way to the underside of the frame using
the 4 bolts and the appropriate flange nuts provided (2 for each foot).
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für MSW MSW-PG2200 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info