Bedienungsanleitung MT Logic CSR-3056MT (Seite 44 von 49) (Englisch, Holländisch)

523733

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

OPERATION

BLUETOOTH OPERATION

• PREPARE FOR BLUETOOTH OPERATION

(i) When use Bluetooth, please make sure the mobile phone supports Bluetooth function.

(ii) For the different kind of mobile phone, Bluetooth emissive power has some difference.

To get the best conversation quality, it is commended that the distance between the

mobile phone and the unit is within 3m. And please don’t put any metal object or any

obstacle between the path of the mobile phone and the unit.

• PAIRING

1.In any mode, press and hold

PAIR (MOD)

button (5) on the front panel, “Pairing” will

appear on the LCD. On the mobile phone, select the Bluetooth set up. (Please

refer to the instruction manual

of your mobile phone on how to operate Bluetooth.

2.“CarBT” should appear in the list on your mobile phone, please select “CarBT” and

then input password “0000”.

4.When successful paired, will be displayed on LCD.

5.If pairing failed, try to pair again within several seconds. You can refer to the operation

6.Note: During Pairing, only

(RELEASE) button (2), VOLUME

/ (25), and

MUTE

button

(14) are functional, other keys are disabled during pairing mode.

During pairing, if you want to exit it, long pressing button (5) until LCD appears

• RE-CONNECTING

This unit is built-in auto-reconnection function. In some conditions, the unit will auto

auto reconnect with the mobile phone (note: the mobile phone must have been

paired with the unit before.).

Before dialing you need to confirm the Bluetooth sign is displayed on LCD.

CON

for several seconds, and “Connect.......” will appear on LCD, when reconnect is successful

Within ten seconds in the following conditions:

1. When you turn off the unit and then turn it on again.

2. Switch off the ACC wire and switch it on again.

3. When you press

(RELEASE) button (2) to release the front panel, the connection will

Press button (4), “NOT PAIR” may be displayed on the LCD. You can wait for several

• T-MENU

When successful paired, shortly press

T-MENU

button (6) on the front panel will enter the

telephone menu, keep pressing this button or press

/ button (1) to change the items

in this menu. The items will be displayed in the following sequence: PRE NUM /

RECEIVED/ DIALED/ MISSED/ MANU ANS/TALK XX.

“ ”

PAIR

The details please see the following instruction.

3.The unit has auto pairing function, it will searching the Bluetooth mobile phone automatically.

about your mobile phone, delete the device that just searching for and repair again.

"PAIR END".

seconds to let the unit reconnection automatically or press and hold button (18) for

several seconds to reconnect. During reconnection, LCD will show "CONN TRY" several

times and then show “CONN OK” if successfully connect.

PRE NUM: Display the speed dial phone number you have stored in the preset memory.

The system can store maximum 10 numbers.

Note: Every system reset operation by pressing reset button (30), the setup of PRE

NUM will be cleared.

1) Store speed dial numbers

a. Press T-MENU button and select PRE NUM item.

b. Use (25) to scan which memory available store.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MT Logic CSR-3056MT Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info