Bedienungsanleitung MT Logic CSR-3057MT (Seite 40 von 49) (Englisch, Holländisch)

523734

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

OPERATION

• MASK

: DPI/ALL

MASK DPI mode: masked only the AF which has Different PI (DPI). MASK ALL mode:

masked the AF which has Different PI and NO RDS signal with high field strength.

• RETUNE: LONG/SHORT

When PI information gets lost at the current station for retune time which is set by RETUNE

SHORT (30 sec.) or RETUNE LONG (90 sec.), the radio start to retune to next same PI

station.

a) PI SOUND mode:

When above different PI sound (DIP) is heard once in a while, the DIP’s sound will

be heard for a short time.

b) PI MUTE mode:

Under above same situation, a mute

sound will be heard for a short time.

The purpose of this function is to reduce unwanted EON TA switching, which EON TA

information was received from current station and the radio switched to that EON linked

station, but no information could not be received because the EON linked station is

located too far from that area. So the radio is switched back to current station again. In

above operation, a customer listens to a wrong program or mute sound for a while.

• EON TA : Local/Distance

• TA VOLUME: You can adjust the TA volume value in this item.

EON TA LOCAL mode

When the filed strength level of EON linked is less than threshold level, the radio does

not switch that station, and a customer can hardly listen to any disturbances.

EON TA DISTANCE mode

EON TA switch is tried to implemented by the information of current station.

• REGION

: OFF/ON

REGION ON mode: AF switching or PI SEEK is implemented to the station which have

all PI codes are the same as current station.

REGION OFF mode: The regional code in the format of PI code is ignored when AF

switching or PI SEEK is implemented.

Listening to Traffic Announcement

button (22) is operated as follows:

When pressed and held for several seconds, it is engaging whether

mode on or off.

When TA mode, is on and a traffic announcement is transmitted:

When the unit was in CD (MP3) mode or AUX IN mode, it will switch

temporarily to radio mode. Temporary switch over to an EON linked station when EON

detects a traffic announcement on that other program. If the volume level was under the

threshold point it will be raised to the threshold point. But the user changed the volume

level, which was more than the threshold point (min.

volume level), it will be set to the

last level. When

mode is on,

of individual segment is turned on.

When a TP station is received, TP of individual segment is turned on.

interruption function

The current traffic announcement is cancelled by pressing this key. But the

mode will

not be off.

The RDS data used are the PI, PS, AF, TP, TA, EON and PTY data.

PI: Program Identification code

Code for identifying programs

PS: Program Service Name

Broadcast station name data expressed in alphanumerically characters

AF: Alternative Frequencies

Frequency list of broadcasting stations transmitting the same program

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MT Logic CSR-3057MT Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info