Bedienungsanleitung MT Logic RD-3058MT (Seite 29 von 38) (Englisch, Holländisch)

547297

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Searching Track Directly

• Press AS/PS button for one time. It enters into “Searching track” in Digital Audio

CD.

• You can use the volume up/down buttons

/ to select the track number

in a sequence.

• Then press BAND button to confirm and start the play.

Searching Directory or File Name

• Press AS/PS button for two times. It enters into “Searching Directory or File

Name” in Digital Audio CD.

• Use the volume up/down buttons to select the characters A to Z, blank, 0 to

9, _, -, +.

• Press SEL button to confirm entry of each characters.

• Press BAND button to start the title search.

• In case the selected title is a directory name, display will show (‘ ‘), then use

the volume up/down buttons

/ to list all songs under this directory and

select the title.

• Press BAND button to confirm and start the play.

• Repeat the above steps if the newly selected title is again a directory.

Searching From Root Directory

• Press AS/PS button for three times. The unit searches file or directory from root

by volume up/down buttons

/ . Display will list all available directories and

songs. Select the desired directory/songs by using volume up/down buttons

/ and BAND button to confirm. If the selected title is a song, it starts to play.

• If the selected title is a directory name, display will show (‘ ‘), then use the

volume up/down buttons

/ to list all songs under this directory and select

the title. Press BAND button to confirm and start the play. Repeat the above

steps if the newly selected title is again a directory.

Searching From Current Directory

• Press AS/PS button for four times. The unit searches file or directory from current

by volume up/down buttons

/ . Display will list all available directories and

songs. Select the desired directory/songs by using volume up/down buttons

/ and BAND button to confirm. If the selected title is a song, it starts to play.

DISPLAY INFORMATION

• Press DISP button to show the following information, such as the track number,

the clock and other information.

• For the disc with MP3 ID3 function version only: ID3 TAG (if available: song title,

directory name, artist name, other contents…) will be displayed on the screen

without pressing DISP button.

USB PLAY OPERATION

• In the front panel of the unit, there is an USB interface. You can connect an USB

device through this interface.

• When you connect an USB device through the interface, the unit will search the

MP3 files or WMA files in the USB driver and start to play MP3 files or WMA files

automatically.

• If in other mode, you can also press MOD button to select USB mode.

• When playing the MP3 files or WMA files in the device, the operation is the same

with the MP3/WMA operation described above.

Note:

• The main unit can only support the standard USB-memory device.

• USB MP3 player is not a standard which means different brand name or different

models have their own standard. So our product cannot support every MP3

player.

• When connecting an MP3 player and there has normal battery in the player (non

rechargeable battery), you should remove the battery from the MP3 player then

connect it to the USB interface. Otherwise, it may cause battery burst.

• When in USB play mode, be sure not to remove the USB driver from the USB

interface.

Instruction Manual

MEMORY CARD OPERATION

• The memory card interface is on the housing of the unit. When you press the

release button to fold down the front panel, you will see the memory card

interface.

• When you insert a memory card in the memory card interface, the unit will

search the MP3 files or WMA files in the card and start to play MP3 files or WMA

files automatically.

• The operation is the same with the MP3 operation described above. If in other

mode, you can also press MOD button to select memory card mode.

• CAUTION: When there are important files in the USB device or memory card, do

not connect it to the main unit to play. And don’t play the CD-R/RW disc that has

important files in it. Because any wrong operation may cause files loss. And our

company assumes no responsibility for this.

DISC NOTES

A. Notes on discs:

• Attempting to use non-standard shape discs (e.g. square, start, heart) may

damage the unit. Be sure to use round shape CD discs only for this unit.

• Do not stick paper or tape, etc, onto the label side or the recording side of any

discs, as it may cause a malfunction.

• Dirt, dust, scratches and warping discs will cause miss operation.

B. Notes on CD-Rs (recordable CDs)/CD-RWs (rewritable CDs):

• The unit cannot play a CD-R and CD-RW that is not finalized. (Please refer to

the manual of your CD-R/CD-RW recorder or CD-R/CD-RW software for more

information on finalization process).

• Depending on the recording status, conditions of the disc and the equipment

used for the recording, some CD-Rs/CD-RWs may not be played on this unit.

• To have more reliable play back, please see following recommendations:

• Use CD-RWs with speed 1x to2 and write with speed 1x to 2x.

• Use CD-Rs with speed 1x to2and write with speed 1x to 2x.

• Do not play a CD-RW which has been written for more than 5 times.

C. Notes on MP3 files (MP3 Version Only):

• The disc must be in the ISO9660 level 1 or level 2 format, or Joliet or Romeo in

the expansion format.

• When naming a MP3 file, be sure the file name extension is “.MP3”.

• For a non-MP3 file, even though the file name extension is “MP3”the unit will

give an error.

BLUETOOTH OPERATION

Switching to Bluetooth Mode

• Press MODE button on remote control or MODE on the front panel enter

Bluetooth mode.

Preparing for Operation

• When use Bluetooth, please make sure the mobile phone supports Bluetooth

function.

• For the different kind of mobile phone, Bluetooth emissive power has some

difference. To get the best conversation quality, it is commended that the

distance between the mobile phone and the unit is within 3m. And please don’t

put any metal object or any obstacle between the path of the mobile phone

and the unit.

Connection

• On the mobile phone, select the Bluetooth set up. (Please refer to the instruction

manual of your mobile phone on how to operate Bluetooth.)

• Select the Bluetooth device in the list on your mobile phone and press enter,

and the unit will ask for a password which is 0000. After entering “0000”, press

enter and the unit will display “CONNECTED OK”.

• When successful connected, the “BT” characters will be displayed on LCD.

• If pairing failed, try to pair again within several seconds. You can refer to the

operation about your mobile phone, delete the device that just searching for

and repair again.

Instruction Manual

MT Logic RD-3058MT Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info