Bedienungsanleitung MTD Electrische maaier (Seite 10 von 13) (Englisch)

629102

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

English Operating manual – Lawn mower with electric motor

Accident

– No person, especially children,

and/or animals should be allowed

to stand close to the mower while

it is in use.

Risk of injury due to ejected

es or other objects.

Falling over

– Operate the vehicle at walking

speed only.

– Be particularly careful when

ing in reverse and pulling the

appliance towards you.

– When mowing on steep slopes,

there

is a risk of the mower tipping

over and you could be injured as a

result. Mow crossways to the

slope, never upwards and down-

wards. Do not mow on inclines

greater than 20%.

– Be particularly careful when

chang

ing direction of travel and

ensure that you always have a

firm footing, especially on slopes.

– Mowing along perimeters involves

a ri

sk of

injury. Mowing near

edges, hedges, or steep inclines

is dangerous. Keep a safe

distance from perimeters when

mowing.

– If the ground is wet the mower

could slip due to

educed traction

and overturn. Mow only when the

grass is dry.

– Work only by daylight or in good

arti

ficial l

ighting.

Injury

– Always maintain a safe distance

from the rotating tool by means of

the steering handle.

– The working area of the operator

is beh

ind the steering handle

during operation.

– Never place your hands, feet, or

othe

r parts of the body near

rotating parts.

– Stop the motor if you have to tilt

the unit

r transport it over

surfaces other than grass.

– Never lift or carry the appliance

en the engine is running.

First, pull the mains plug out of the

soc

et.

– Switch the motor off and pull out

the mains

plug before loosening

blockages or removing obstruc-

tions from the discharge channel

or before che

cking, cleaning,

transporting or adjusting the lawn

mower or before working on the

unit.

– If you remove the grass catcher,

you or

othe

r persons might get

injured due to ejected, mowed

materials or foreign bodies.

Never empty the grass sack while

the eng

ine is running. To do this,

switch off the unit.

– Check the surface on which the

pliance is to be used and

remove all objects that the

appliance can take up and fling

out.

– Do not use the unit in adverse

her conditions, e.g. if there is

a probability of rain or a storm.

– If the cutter strikes a foreign object

(e.g.

one) or if the unit starts

vibrating unusually: Switch off the

motor immediately and pull out the

mains plug.

Before continuing to use the unit,

ve it

checked for damage by

a service centre.

– In the case of mowers with rotary

blad

es, never stand in front of

grass ejection holes.

– Before leaving the unit, always

ll out the mains plug.

Stumbling

– When turning the unit, you may

trip over the connection cable and

injure yourself. Always guide the

cable in such a way that it is

always kept out of the walking and

working area.

– Operate the vehicle at walking

speed

only.

Caution

Damage to the lawn mower.

– Stones, scattered branches, and

similar objects can damage the

machine and impair its correct

operation. Remove all objects

from the appliance’s path before

every use.

– Operate the appliance only when

is in good

technical condition

Subject the appliance to a

thorough visual check before

using it. Check in particular the

safety devices, electric controls,

power cables and threaded

connections for damage and

secure attachment. Replace

damaged parts before operating

the unit.

Operating times

Comply with the national/municipal

regulatio

ns concerning the times

when the mower may be used

(if required, contact your local

auth

ority).

Directions

Details of specific locations on the

appli

ance (e g. left, right) are

always quoted as seen from the

steering handle and while facing

forward.

1. Hang the grass catcher

Figure 2

 Lift up the deflector flap and hook

the grass sack onto the

appliance.

2. Set the cutting height

Caution

Select cutting height for uneven

terrain to prevent the cutter from

ever coming into contact with

the ground.

Figure 3

Set the cutting height of t

he grass

as required.

Setting option (depending on model)

from

app

rox. 3 cm to maximum 9 cm.

Note

If units have individual wheel

adjustment, set all whe

els to the

same height.

Model A:

 Unscrew wheels and move to the

appropriate height setting.

Model B:



Pull the flap and snap into place in

the position required.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MTD Electrische maaier Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MTD Electrische maaier

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info