Bedienungsanleitung MTD Optima 4218 E HW (Seite 11 von 13) (Englisch)

629110

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Operating manual – Lawn mower with electric motor English

Model C:

 Advance or push back the lever

of the central vertical adjustment

and snap into place in the

position required.

Model D:

 Actuate lock and simultaneously

set the required height by pulling

or pressing on the handle/lever.

When the lock is released, the

selected setting engages.

Model E:

 Pull the wheel forwards and lock

in the required position.

3. Power cord

Figure 4

 Attach connection cable to the

cable grip.

 Insert the connection cable first

into the switch/plug combination

on the unit and then into a

230 V-socket.

4. Starting the engine

Danger

Keep hands and feet well away

from the cutting bl

ade.

Caution

– Do not tip the appliance when

starting.

– If an attempt is made to start the

t in tall grass, the motor may

overheat and be damaged.

Figure 5

 Keep the appliance on an even

surface with little or the shortest

possible grass.

 Standing behind the unit – press

and hold down the locking

button.

 Pull and hold the safety lever,

release locking button.

The motor and the cutter run.

You can now start work.

5. Engaging/disengaging

gear drive

(only in the case of lawn mowers

with gear drives)

Figure 9

Putting gear drive into gear

 Pull lever and hold.

Throwing gear drive out of gear

 Release lever.

6. Stopping the engine

 Release the safety hoop.

The engine and the cutting tool

stop aft

er a short time.

7. Detaching and

emptying the grass

sack

Figure 2

If cut grass is left lying on the

ground or if the

level indicator

(optional, Fig. 10) indicates that the

sket is full:

 Release safety hoop and wait

until the engine stops.

 Lift the deflector flap and unhook

the grass sack.

 Empty out the contents.

8. Working without the

grass sack

Whenever you detach the grass

sack, the deflector flap drops down.

When working without a grass

catcher, the mowed grass is

ejected directly downwards.

9. Retrofitting for

mulching

(only for units with mulching

accessory/ optional).

Units with rear discharge:

Figure 7A

 Lift the ejection flap.

 Remove the grass catcher.

 Insert mulch key (depending on

model).

 Lower the ejection flap.

Note

Models with integrated mul

ching

function do not require a separate

mulch key – a specially shaped rear

flap assumes this function (Fig.

7B).

Units with side discharge:

 Remove side discharge – impact

protection/mulch lock closes

automatically (Fig. 8A).

10. Changing units over to

side discharge

(depending on model)

 If fitted:

Remove grass catcher and lower

the rear dischar

ge flap.

 Lift impact protection/mulch lock

and attach side discharge

(Fig. 8B).

11. After finishing work

 Empty the grass sack.

 Pull the mains plug out of the

socket and the unit.

 Leave the motor to cool down

(approx. 30 minutes) before

cleaning, servicing, storing or

shutting down the unit.

Tips on lawn care

Mowing

Lawns consist of various grass

types. Frequent mowing promotes

the growth of grass, resulting in

strong roots and a firm sward. If

you seldom cut the grass, you will

enhance the development of high-

growing types of grass and other

weeds, such as clover, daisies).

The normal height of a lawn

approx.

4–5 cm. Only

of the total

height should be mown; therefore

cut 7–8 cm long grass to normal

height. Try not to cut the grass

shorter than 4 cm, otherwise the

lawn will suffer during dry periods.

If the grass has grown particularly

gh (for example, during a holiday

period), cut it back to its normal

height in several stages.

When mowing, always overlap the

mown

swa

ths slightly.

Mulching (using the

accessories)

The grass is cut into small pieces

(approx. 1 cm) and left to lie on the

lawn. The lawn therefore retains a

lot of nutrients. For an optimum

result always keep the lawn short,

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MTD Optima 4218 E HW Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von MTD Optima 4218 E HW

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info