683946
30
Zoom out
Zoom in
Vorherige Seite
1/59
Nächste Seite
TECHNICAL MANUAL GS 4x.10 KNX ENGLISH
30
8. Temperature control
8.1 Temperature control – heating and cooling
Designation
Options
Description
Select heating and/or
cooling
Disabled
Heating
Cooling
Heating and cooling
Temperature controller disabled.
Operating mode: Heating only.
Operating mode: Cooling only.
Operating mode: Heating and cooling.
Extra level heating /
Extra level cooling
Disabled
Enabled
Extra level heating / cooling disabled.
In addition to the main level (e.g. underfloor heating) an extra level (e.g. electric heating) can be helpful for lazy
systems. It can shorten the slow heat-up phase of an underfloor heating. You can choose between a PI or two-
stage controller for the additional object.
Guide heating /
Guide cooling
Disabled
Enabled
Guide heating / cooling disabled.
With the parameter guiding it is possible to adjust the set point linearly depending on any reference
variable which is captured through an external sensor. In general, an outdoor temperature reset control is
realized. With an appropriate parameterization, the constant raising or lowering of the set value is
possible. The parameterization is carried-out together with the definition of the set points.
PI control: A PI control is a constant control that comprises a
proportional part (P-part) and an integral share (I-share). The size of the
P-part is indicated in Kelvin, the I-share in minutes. At a constant PI
control, the manipulated variables are operated in proportional steps up
to a maximum value.
2-stage-control: A two-stage control only sends two conditions for the
manipulated variable, on and off. The control turns on when falling
below a desired temperature and turns off when exceeding it. Set point
and switching hysteresis are defined in advance.
Main level and Extra level: In addition to the main level (e.g.
underfloor heating) an extra level (e.g. electric heating) can be helpful
for slow systems controlled by main level. This can shorten in the
mentioned example the slow heat-up phase of an underfloor heating.
You can choose between a PI or two-stage controller for the additional
object.
30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Muller GS 40.10 knx wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Muller GS 40.10 knx

Muller GS 40.10 knx Installationsanweisung - Deutsch - 59 seiten

Muller GS 40.10 knx Bedienungsanleitung - Deutsch, Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info