683946
43
Zoom out
Zoom in
Vorherige Seite
1/59
Nächste Seite
TECHNICAL MANUAL GS 4x.10 KNX ENGLISH
43
13.2.1.3 Blind sensor
Designation
Options
Description
Blind operating
function
2-push-button, standard
Reaction at shot
actuation
Stop / slat OPEN
Stop / slat CLOSED
Operating mode with two push buttons for blinds.
Blind stops / slat opens step-by-step.
Blind stops / slat closes step-by-step.
Reaktion at
long actuation
High
Down
Move blinds / shutters up.
Move blinds / shutters down.
Long actuation from
… s
0,3 to 10,0 seconds
If active, definition of when to count the actuation as a „long actuation“ can be done.
2-switch, only move
(roller blind)
Reaction at actuation
High
Down
Operating mode with two switches for blinds / shutters without slat function.
Move blinds / shutters up.
Move blinds / shutters down.
2-push-button, move
(roller blind)
Reaction at actuation
High
Down
Operating mode with two push buttons for blinds / shutters without slat function.
Move blinds / shutters up.
Move blinds / shutters down.
2-push-button, only slat
Reaction at actuation
Stop/ slat OPEN
Stop/ slat CLOSED
Operating mode with two push buttons for blinds / shutters (only slat function).
Blinds stop / open slat.
Blinds stop / close slat.
„Slat“ telegram
repeated every …s
0,3 to 10,0 seconds
Configuration of repetition time for telegram „slat“.
1-push-button,
short=slat, long=move
Long actuation from
… s
0,3 to 10,0 seconds
Short actuation: STOP / Schrittweise
Long actuation: Fahren AUF/AB
1-push-button,
short=move, long=slat
Long actuation from
… s
0,3 to 10,0 seconds
Kurze actuation: Move UP/DOWN
Lange actuation: STOP/ stepwise
1-push-button,only move
One after another at actuation: UP, STOP, DOWN, STOP.
1-switch, only move
At actuation: move UP/DOWN.
STOP at end of actuation.
Input is being
actuated
closed
opened
Definition of function of input either as NO or NC contact.
Debouncing time
10 to 150 ms
Definition of debouncing time for the input.
Enable object
„disable“
Inactive
Active
Communication object (blocking object) for input is disabled.
Communication object (blocking object) for input is enabled.
43

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Muller GS 40.10 knx wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Muller GS 40.10 knx

Muller GS 40.10 knx Installationsanweisung - Deutsch - 59 seiten

Muller GS 40.10 knx Bedienungsanleitung - Deutsch, Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info