683937

Muller LS 30.00 knx Seite 4

4
Zoom out
Zoom in
Vorherige Seite
1/4
Nächste Seite
BA LS30knx Anwendungsprogramm HM; DE,GB - 23346 - ED – V01
* Functions available in ETS application program LS 30.00 knx Version 4.0, only in combination with hardware manufactured in CW16/2017 or later.
INSTRUCTION MANUAL ENGLISH – PAGE 2 /
2
Parameters
Parameter time switch standard
You have the possibility to activate 2 switching times (functionality like a time
switch with daily program) with a defined switching duration. Depending on the
start time and duration a switch-bit with the value “1” for ON respectively the
value “0” for OFF will be sent to the bus.
Adjustments / Description
Values
Time switch
Inactive/active
2nd switching time
Inactive/active
1
st
switching time: Switch on from [hour], [minute]
00:00 – 23:59
1
st
switching time: Switch on to [hour], [minute]
00:00 – 23:59
2
nd
switching time: Switch on from [hour], [minute]
00:00 – 23:59
2
nd
switching time: Switch on to [hour], [minute]
00:00 – 23:59
Parameters
Parameter light control
You have the possibility to send the lux value to the bus and/or to activate a light
control: lux switching (functionality like a twilight switch). Depending on your
parameter settings (Lux threshold / -hysteresis / -delay) the light control works
like a twilight switch and sends a switching bit or a scene to the bus when
reaching the lux thresholds. Additionally you have the option to activate an Extra
time switch. With this function you can program further switching times (OFF /
ON) with an adjustable duration (e.g. for energy saving solutions).
LUX LOGIC:
LUX THRESHOLD: Set the thresholds for the lux switching (ON / OFF).
FURTHER LUX THRESHOLD: You can set a further lux threshold.
LUX DELAY ON or OFF: It is possible to set a delay to avoid undesirable
switching due to disturbing light sources, e.g., car lights.
LUX HYSTERESIS: It is possible to set a hysteresis to avoid undesirable
switching due to disadvantageous positioning of the sensor, e.g., close to a
yard light.
Adjustments / Description
Values
Send measurement value
never, on query, on query and automatic/cyclic, on query
and change, on query and change and automatic/cyclic
Cycle interval for measurement value
every 30 seconds, every minute, every hour, every 6
hours, every 12 hours, at 00:00 am, at 00:02 am
Send upon x[%] change of measured value
1 – 50
Lux switching
Inactive/active
Light control depending on internal measurement or external bus value
Measurement value (intern), Bus (extern)**
Lux logic
ON at darkness / OFF at brightness,
OFF at darkness / ON at brightness
Threshold 2
Inactive/active
Extra time switch
Inactive/active
Settings for threshold 1 / treshold 2:
Threshold in [lux]
1 – 220.000 Lux
Hysteresis in [%]
0 – 50
Delay darkness in [s]
0 – 3600
Delay brightness in [s]
0 – 3600
Switching bit or scene
Switching bit, scene
Scene number for switching on
1 – 64
Scene number for switching off
1 – 64
* Enable blocking object
No/Yes
* Behaviour of blocking object
Block on 1 / Block on 0
* Condition after reset
Released / Blocked
* Behaviour when released
No action / Send current value
* Behaviour when blocked
No action / Send telegram
* Telegram when blocked
0/1 or scene number 1-64
Switch OFF
Inactive/active
Switch off from [hour], [minute]
00:00 – 23:59
Switch off to [hour], [minute]
00:00 – 23:59
Switch ON
Inactive/active
Switch on from [hour], [minute]
00:00 – 23:59
Switch on to [hour], [minute]
00:00 – 23:59
Parameters
Parameter temperature control
You have the possibility to send the temperature values to the bus and/or to
activate a temperature control (by activating the temperature threshold).
Depending on your parameter settings (Temperature setpoint + Delay
temperature setpoint + Temperature hysteresis) the temperature control sends a
switching bit or a scene to the bus when reaching the temperature thresholds.
TEMPERATUR LOGIC:
Adjustments / Description
Values
Send measurement value
never, on query, on query and automatic/cyclic, on query
and change, on query and change and automatic/cyclic
Cycle interval for measurement value
every 30 seconds, every minute, every hour, every 6
hours, every 12 hours, at 00:00 am, at 00:02 am
Send upon x*[0.1°C] change of measured value
1 – 255
Temperature threshold
Inactive/active
Temperature control depending on internal measurement or external bus
value
Measurement value (internal), Bus (external)**
Temperature setpoint in [0.1°C]
-500…+1000
Temperature hysteresis in [0.1°C]
1 – 600
Delay temperature setpoint in [s]
0 – 3600
Temperature logic
T > setpoint (cooling), T < setpoint (heating)
Switching bit or scene
Switching bit, scene
Scene number for switching on
1 – 64
Scene number for switching off
1 – 64
* Enable blocking object
No/Yes
* Behaviour of blocking object
Block on 1 / Block on 0
* Condition after reset
Released / Blocked
* Behaviour when released
No action / Send current value
* Behaviour when blocked
No action / Send telegram
* Telegram when blocked
0/1 or scene number 1-64
* Functions available in ETS application program LS 30.00 knx Version 4.0, only in combination with hardware manufactured in CW16/2017 or later.
** Definition „Receiver (internal) / Measurement value (internal)“: If „Receiver (internal)“ or „Measurement value (internal)“ is selected
the measurements provided by the LS30.00knx will be used and will also be send to the bus!
Definition „Bus (external)“: If „Bus (external)“ is selected the values provided from the bus will be used but still the measured
values of the LS30.00knx will be send to the bus!
4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Muller LS 30.00 knx wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Muller LS 30.00 knx

Muller LS 30.00 knx Bedienungsanleitung - Deutsch, Englisch - 2 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info