Bedienungsanleitung Muller SC 98.40 knx (Seite 4 von 4) (Deutsch, Englisch)

683950

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

BA SC9840knx HARDWARE N; DE, GB - 23245 – 2013-05-V02 ED

Instruction Manual (Site 2/2)

KNX time switch

16.Special program Entry

** The cycle function will only be offered if it is activated (point 13)

The yearly function of the switch is realised by special (weekly) programs which can be called up by date. Up to 10

special (weekly) programs can be entered (Program-Number 01 –> Program-Number 10).

Execution of the Special program only after activation by date (SP activation see point 17).

Some rules for the programming of Special programs



Define the program number in which the new step will be an element before a new switching step is entered.

(Program-number 01 – Program-number 10)



The number of switching times which can be pro

grammed in each special program is only limited by the total number

of free memory locations:

(SP on, SP off, SP cycle, SP pulse)



The dates of the year during which the special program should be applied can be entered within the activation menu

(point 17)



Each special program can be activated as often as there are memory locations are available (point 17)



During the activation dates of special programs only switching steps of the special program with highest priority will

be executed. Remaining special and standard programs are disabled.



Please note the priorities of the different switching programs (point 15)

Information: You can easily transfer switching times from one channel to the other if you use the copy function.

17. Special program activation by date

A special program will only be executed if it is activated (and if it has the highest priority of all active

switching programs (point 15)). Special programs can be activated as often as free memory locations are

available. You can choose the special program (Program-Number), the dates for activation (Start-

date until End-date) and additionally following options:



Without special function: Special program will be applied each year fixed to the entered

dates



With Easter function: The time switch

takes into account the yearly shift for Easter holiday for

the following years and corrects the activation dates. (For programs relative to Easter, Pentecost

Carnival, Ascension,...)



With 1xfunction: Special program will be applied only once.

Information: You can easily transfer switching times from one channel to the other if you use the

copy function.

18. Extra switching time

19. Permanent program

Program -> new program -> channel A/B/C/D -> Extra switching time -> …

These programming steps are single switching times by date. Extra switching times do not disable switching programs with lower priority.

Adjust the switching function (AT on, AT off, AT cycle, AT pulse) and the date on which the extra switching time will be executed. The

following options are additionally available for the Extra switching time:



Without special function: The switching time will be applied each year fixed to the entered date.



With weekday function: The switching date takes into account the yearly shift of the weekday of the month.

(E.g.: The switching date is always the second Saturday in February for the current and the following years)



With 1xFunction: The switching time will be applied only once.

Program -> new program -> channel A/B/C/D -> permanent -> …

The permanent by date program (holiday program) is a permanently on or off status of the channel for the

programmed dates. The number of switching times is only limited by the total number of free memory

locations. Adjust channel, switching function and the duration by d

ate. The following options are additionally

available for the permanent by date program:



Without special function:

The program will be applied each year fixed to the entered dates.



With Easter function: The time switch takes into account the yearly shift

for Easter holiday for

following years and corrects the activation dates. (For programs relative to Easter, Pentecost Carnival,

Ascension,...).



With 1xfunction:

The Program will be applied only once.

20. Channel keys

Options -> channel-keys -> …

Within the Options menu you will find submenu channel-keys. Here you have the

opportunity to assign different response functions to the output channels.

These response functions will only be carried out when using the channel-keys of the time

switch (manual over-

ride) or optionally when activating the channel with the external input. Thus,

a programmed switching time will be executed as usual, independent of the settings within this

channel-key-menu.

The correlation between the channel-keys and the channels is as follows:



channel A => channel key A (push-button “A” of the device) / channel B => channel key B …

** The cycle function will only be offered if it is activated (point 13)

Overview „channel-keys“ functions:

If you have assigned a specific response function to a channel, this switching function will occur if you push the channel-button on the front plate of the time

switch (or if the external input for this channel is activated and a signal is applied to the input). For each channel one out of the following functions can be

defined:



Change function (default setting): By pressing the channel key (or optionally using the external input) the switching status changes from ON to OFF

or OFF to ON. This corresponds to a standard manual over-ride of the channel.



Timer function: By pressing the channel key (or optionally using the external input) the Timer starts and the corresponding channel switches ON

. After

the expiry of the Timer-time the channel switches OFF. If the channel receives another signal before the expiry of time the time switch reacts as follows:

 After pressing the channel-button = Timer stops and the channel switches OFF.

 Signal on the external input = Timer restarts/ Staircase lighting timer -> Resettable.



Cycle 1 – 4: By pressing the channel key (or optionally using the external input) the cycle function starts. Attention: This function is only available if

the cycle is activated and defined in advance within menu Options and submenu Cycle.



Perm on: By pressing the channel key (or optionally using the external input) the channel switches permanently ON. This status remains active until the

channel key of the device is pressed again.



Perm off: By pressing the channel key (or optionally using the external input) the channel switches permanently OFF

. This status remains active until the

channel key of the device is pressed again.

The Change function, Timer function and Cycle functions will be overridden by the regular switching program or by a manual over-ride!!!

21. Additional adjustments

22. Program modify

Main menu

Application

Program -> Program modify -> …

Within

Program modify

each single switching time can be modified.

Program query

Program

To query the programming steps and remaining memory locations

Program copy

Program

Copy from one channel to another. Memory of the channel won’t be

overwritten; the copied switching steps appear additionally.

Permanent by date function is not copied!

Program delete

Program

Deletion of switching time(s). The program for all channels, single

channels and single programming steps within on channel can be

deleted.

Date-Time

Adjustment

Adjustment of date and time

Summertime

Adjustment

Adjustment of the daylight saving time mode (ON/OFF)

Language

Adjustment

Choice of languages

Factory Defaults

Adjustment

Reset to the state of delivery.

Date, time and switching program will be lost!

23. Data-key

With a Data-key following activities are possible:



Save data: Writes the data from the time switch into the memory of the Data-key.



Program timeswitch: Writes the data located inside the Key into the memory.



Key function: The time switch will solely apply programming steps from the Data-key. The

switching program of the time switch is suppressed.



Key readout: To query the switching program of the Data-key.

Counter

Options

Displays the hour counter and pulse counter for each channel and

the time switch itself.

PIN-Code

Options

The time switch can be locked with a 4-digit PIN-Code. The code

can be adjusted, activated and deactivated. If you have forgotten

the Code please call customer service.

Reset-Function

Press all front keys for 2 seconds. The time switch is reset. The values for date and

time will be deleted and have to be re-entered. The switching program has not

been deleted!

Muller SC 98.40 knx Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Muller SC 98.40 knx

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info