Bedienungsanleitung Multiplex FunJet 21 4213 (Seite 8 von 32) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

561586

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

Examine your kit carefully!

MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope

that you are completely satisfied with the contents of your kit. However, we would ask you to check all the parts before

you start construction, as we cannot exchange components which you have already worked on. If you find any

part is not acceptable for any reason, we will readily correct or exchange it. Just send the component to our Model

Department. Please be sure to include the purchase receipt and a brief description of the fault.

We are constantly working on improving our models, and for this reason we must reserve the right to change the kit

contents in terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please

understand that we cannot entertain claims against us if the kit contents do not agree in every respect with the instructions

and the illustrations.

Caution!

Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating

them safely requires a certain level of technical competence and manual skill, together with discipline and a

responsible attitude at the flying field. Errors and carelessness in building and flying the model can result in

serious personal injury and damage to property. Since we, as manufacturers, have no control over the

construction, maintenance and operation of our products, we are obliged to take this opportunity to point out

these hazards and to emphasise your personal responsibility.

Additional items required:

Radio control system components: Function

Micro IPD UNI receiver 35 MHz A-band Order No. 5 5971

alternatively: 40 MHz Order No. 5 5972

RX-7 SYNTH IPD receiver 35 MHz A-band Order No. 5 5880

alternatively: 35 MHz B-band Order No. 5 5881

Nano S servo (2 required) Aileron / elevator Order No. 6 5120

Recommended power system: PERMAX BL 480/5D Order No. 33 2630

Contents: PERMAX 480/5D motor, collet propeller driver,

5.5 x 4.5” APC propeller, Multicont BL 37 controller

or:

PERMAX 480/6 # 33 2484, 5.5 x 4.5” MPX propeller # 73 3146, Multicont BL 27 # 7 2275

Flight batteries:

MULTIPLEX flight battery LiBATT SH BX 3/1-2100P Order No. 15 7131

or LiBATT SH BX 3/1-3200P Order No. 15 7136 or

Order No. 15 7035

Battery charger:

MULTIcharger LN-5014 DC (charge current 100 mA … 5 A) Order No. 9 2531

1 - 14 NiCd / NiMH cells and 1 - 5 Lithium-Polymer cells

Adhesive:

Use any type of medium or thick cyano-acrylate adhesive (“cyano” - not in the MULTIPLEX range).

Do not use styrofoam cyano.

Tools:

Scissors, combination pliers, balsa knife, screwdriver, 4 - 5 mm Ø bradawl or small round file.

Specification:

Wingspan 795 mm

Fuselage length 750 mm

All-up weight approx. 620 g

Wing area approx. 15 dm²

RC functions Aileron, elevator and throttle

Note: Please remove the illustration pages from the centre of the instructions.

Kit Nr. Art. # 21 4213

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex FunJet 21 4213 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info