Bedienungsanleitung Multiplex ROYALevo12 (Seite 8 von 57) (Englisch)

30266

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

Instructions

Page 63

7. The transmitter

7.1. Front face of transmitter

•• Two precision stick units for controlling the 4 pri-

mary control axes. Stick ratchet for throttle/spoilers, can

be activated on right or left stick unit (è 7.4.6.). Both

units can be swivelled to suit the pilot’s personal prefer-

ence (è7.4.7.). The stick tops can be rotated and are

infinitely variable in length. Various optional versions

are available.

‚‚ Two sliders “E” and “F” are fitted as standard, and

can be assigned to any channel. They also operate as

switched functions with centre detent.

ƒƒ Two cruciform trim assemblies located below the

stick units provide digital trimming facilities on the

primary control axes. Each set consists of a pair of but-

tons for left/right and up/down.

„„ Audible sounder (piezo beeper)

…… When the transmitter is switched on, the RF status

display LED

(red LED) indicates whether an RF (Radio

Frequency) signal is being transmitted:

LED glowing constantly → no RF transmission

LED flashing (2 sec.) → RF transmission

The LED is controlled by the current drain of the RF

module. For example, if the transmitter crystal is not

present, or is defective, no RF signal can be generated,

and the constantly glowing LED alerts you to the fact

that an RF signal is not being transmitted.

†† Keypad consisting of 11 buttons in 2 rows. The 6

buttons in the first row provide fast, direct access to the

6 main menus (direct menu access buttons). The 5 but-

tons in the second row are used for programming pro-

cedures. With the exception of the “ENTER” button, all

the buttons have a double function for entering text.

The method of entering text is similar to that used with

mobile telephones.

‡‡ ON/OFF-switch („O“ / „1“)

ˆˆ The screen is a modern, UV-stable, graphical LCD

screen (132 x 64 dots) with an anti-reflective coating.

The contrast is variable (è 13.1.5.). The screen can be

moved through about 40º in order to optimise the view-

ing angle.

All switches and buttons (apart from installation wells

“K” and “P”è 7.4.11.) are arranged as standard in easily

accessible positions. They cannot be re-positioned or

swapped over. The designations of the switches and

buttons are neutral (“G”, “H”, “I”, ... “O”, “P”). They can be

defined in any way to provide channel functions and/or

switched functions (transmitter controls or switches è

13.3.4. and 13.3.5.), i.e. the designations serve only to

identify them.

‰‰ The transmitter features two 3-D digi-adjustors

which are used for programming and adjusting the

system. They are a permanent feature and are fitted as

standard. During the programming process both digi-

adjustors can be pressed and/or rotated, and work in

parallel with the “ENTER” or „s“(UP) / „t“(DOWN) but-

tons. For operating a model it is possible to assign many

different parameters to the 3-D digi-adjustors, which

can then be used to adjust those settings conveniently

e.g. while the model is flying (è 10.2.2.).

ŠŠ Mounting lug for attaching a neckstrap

(e.g. # 8 5161 or # 8 5646)

7.2. Rear face of transmitter

Two sliding latches • (OPEN) provide a fast, easy

method of opening and closing the transmitter, e.g. for

changing the crystal or RF module (è 7.4.3.).

The stout carry handle ‚ enables you to carry the

transmitter safely, and also protects the back of the case

when you put the transmitter down.

As usual with MPX, the ROYALevo features a MULTIPLEX

multi-function socket

ƒ (marked “CHARGE” on the

case) as standard. Its purposes are as follows:

• Charging the transmitter battery (è8.4.)

• Connecting the transmitter to another for

Teacher/Pupil operations (è 13.4.)

• PC interface for backing up model data (è 19.6.)

• PC interface for updating the transmitter (è 19.6.)

• PC interface for flight simulators (è 19.6.2.)

• Interface for diagnosis lead, i.e. controlling a re-

ceiver for programming and adjustment without

transmitting an RF signal (è 19.3.2.)

‰

•

‡

†

‰

•

‚

„

…

•

‚

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo12 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info