Bedienungsanleitung Multiplex ROYALevo9 (Seite 13 von 110) (Holländisch)

30282

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

ROYAL

pro

8. The Transmitter Battery

The ROYAL

pro

is powered by a high-quality re-

chargeable PERMABATT+ battery consisting of six

AA-size NiMH (Nickel-Metal-Hydride) cells.

Features of the PERMABATT+ transmitter battery:

x Capacity 2100 mAh

(approx. eight hours’ operation possible).

x Self-discharge rate around 25% per year

(no recharging required even when stored for long

periods).

x Fast-charge capable, max. 1.4 A

The pack must only be charged using a charger

with automatic cut-off: Delta-Peak cut-off at < 5 mV

per cell.

x Normal charge at 210 mA

(corresponding to 1/10 C, charge for sixteen hours).

x Integral over-current fuse, self-resetting

The battery is ready for use again approx. 1 s after

the excessive current is eliminated.

x Avoid deep-discharging the battery (< 5.4 V).

x If the transmitter or transmitter battery is to be

stored for a long period (several days), avoid tem-

peratures above 30°C (brief maximum 55°C).

Note:

Like many other technical components, rechargeable

batteries are the subject of constant development. For

this reason we reserve the right to alter the specifi-

cation of the battery pack installed as standard, in or-

der to keep abreast of technical developments.

8.1. Safety Notes

! The transmitter battery is responsible for the power

supply to the transmitter, and plays an important

role in operational security. For this reason it is es-

sential to heed our recommendations regarding

charging and storing the rechargeable battery.

! The transmitter is fitted with a self-resetting fuse

which protects the battery and the transmitter from

short-circuit, reversed polarity and excessive cur-

rents. The transmitter electronics feature no addi-

tional fuse!

For this reason it is absolutely essential to use

genuine MULTIPLEX transmitter batteries in this

transmitter!

! Additional safety notes:

x Batteries are not playthings, and must always be

stored well out of the reach of children.

x Check that the battery is in perfect condition before

every flying session. Damaged or defective bat-

teries must not be re-used. Dispose of them in the

authorised manner / recycling centre (Î 8.8.).

x Do not heat, incinerate, open or short-circuit re-

chargeable batteries, do not charge or discharge

them at excessive currents, do not overcharge

them, and do not charge with reversed polarity.

x Place the transmitter or battery on a heat-resistant,

non-inflammable and non-conductive surface for

charging, and do not leave it on charge unsuper-

vised.

x Do not modify the battery pack in any way. Never

solder or weld directly to the cells.

x Mis-handling the battery incurs a risk of combus-

tion, explosion, corrosion and burning.

Suitable extinguishing agents: water, CO

, sand.

x Escaped electrolyte is corrosive!

Do not allow electrolyte to contact your skin or eyes.

In an emergency rinse the affected area with copi-

ous quantities of water, and call for medical assis-

tance immediately.

8.2. Charging the transmitter battery

Never connect the transmitter to a battery

charger without a battery in the transmitter!

High voltages may be present at the charge out-

puts of battery chargers if no battery is connected.

These voltages can easily damage the transmitter.

Timer-controlled fast-charging, automatic cur-

rent setting systems and REFLEX charging

must not be used with this battery!

Fast-charge at max. 1.4 A!

This also applies if you remove the battery

from the transmitter for charging.

Important when fast-charging:

The battery charger must be suitable for NiMH

cells!

Delta-Peak cut-off sensitivity < 5 mV / cell

Charging using mains or 12 V chargers:

It is safe to leave the battery in the transmitter for

recharging. The charger should be connected

using the multi-function socket on the underside

of the transmitter (Î 9.2.). Use genuine MULTIPLEX

charge leads (e.g. transmitter charge lead with

banana plugs # 8 6020). Please refer to the cur-

rent MULTIPLEX main catalogue for information

concerning other charge leads and battery char-

gers.

8.3. The correct method of charging

a. Switch the transmitter OFF.

b. Select a charger suitable for NiMH batteries,

switch it on and connect the charge lead to it.

c. Check correct polarity:

red plug = positive terminal (+)

blue / black plug = negative terminal (-)

Connecting the transmitter battery with re-

versed polarity may wreck the battery

(overheating, escape of corrosive electrolyte, cell

burst)!

d. Connect the charge lead to the transmitter

(back panel, CHARGE (Î 9.2.)).

e. Select the charge current (max. 1.4 A).

If you are using an automatic fast-charger,

select the current manually!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo9 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info