Bedienungsanleitung Multiplex ROYALevo9 (Seite 104 von 110) (Holländisch)

30282

104

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

Manual

103

FLAP+ Flap

When the transmitter control Flap is

operated, the camber-changing flaps

move up or down together in order

to alter the camber of the wing sec-

tion for optimising the wing for

thermal and speed flying:

trv' = Flap deflection, e.g. up

for speed flying

trv# = Flap deflection, e.g. down

for thermal flying

Set the values in such a way that the

airfoil camber of the flaps and ailer-

ons is even over the full wingspan

Spoiler

When the transmitter control

Spoiler is operated, both the cam-

ber-changing flaps deflect down

together to act as a landing aid:

offs = Offset for flap servos (see

notes below on calibrating

the AILERON+ servos for

four-flap gliders)

trv = Aileron deflection when

spoilers are fully deployed

When ailerons deflect up and flaps

deflect down in response to the

Spoiler transmitter control, the re-

sult is what is known as the Butter-

fly or Crow landing system

Aileron

Maximum setting of camber-

changing flap travels (opposite di-

rections) when the transmitter con-

trol Aileron is operated:

trv' = Deflection of both flaps in

one direction (e.g. up)

trv# = Deflection of both flaps in

the other direction (e.g.

down)

If asymmetrical travels are selected,

aileron differential (set using

Ail.Diff.) can be adjusted to main-

tain the deflection of the camber-

changing flaps, or to set them inde-

pendently of the ailerons if neces-

sary.

This mixer input is switchable if a

physical switch is assigned to it. For

example, the input can be switched

on for aerobatic flying to enhance

aileron response

Ele -Tr

When the elevator stick is operated,

both ailerons deflect up or down in

order to amplify the elevator effect

for aerobatics (“snap-flap mixer”):

trv' = Aileron deflection when

down-elevator is applied

trv# = Aileron deflection when

up-elevator is applied

This mixer can be switched off and

on at any time using the Snap-Flap

switch

V-TAIL+

Elevator

trv' = Control surface deflection

for down-elevator

trv# = Control surface deflection

for up-elevator

Rudder

trv' = Control surface deflection

for rudder in one direction

(e.g. up)

trv# = Control surface deflection

for rudder in the other di-

rection (e.g. down)

Spoiler

Elevator trim correction for Spoiler

(airbrakes):

pt1 = Elevator compensation for

half-deployed spoilers

pt2 = Elevator compensation for

fully deployed spoilers

Flap

Elevator trim correction for Flap:

trv' = Elevator com

ensation for

(e.g.) Thermal setting

trv# = Elevator compensation for

(e.g.) Speed setting

Thr -Tr

Elevator trim correction for throttle

(motor):

dead = Dead-zone / from which

point does elevator cor-

rection take effect?

trv = Elevator compensation for

full-throttle

* only appears if V-TAIL+ is active

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex ROYALevo9 Seite 104

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Multiplex ROYALevo9

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info