Bedienungsanleitung Multiplex Twister 21 4222 (Seite 3 von 14) (Deutsch, Englisch, Französisch, Italienisch, Spanisch)

561569

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

# 21 4222

Examine your kit carefully!

MULTIPLEX model kits are subject to constant quality checks throughout the production process, and we sincerely hope that you are

completely satisfied with the contents of your kit. However, we would ask you to check all the parts (referring to the Parts List) before

you start construction, as we cannot exchange components which you have already worked on. If you find any part is not

acceptable for any reason, please take the kit back to your model shop in the first instance, as he will be able to advise you. After

checking, he will send the component or the kit to our Quality Control department. We can only process guarantee claims if the

purchase receipt and a brief description of the fault are supplied.

We are constantly working on improving our models, and for this reason we must reserve the right to change the kit contents in

terms of shape or dimensions of parts, technology, materials and fittings, without prior notification. Please understand that we

cannot entertain claims against us if the kit contents do not agree in every respect with the instructions and the illustrations.

Caution!

Radio-controlled models, and especially model aircraft, are by no means playthings. Building and operating them safely

requires a certain level of technical competence and manual skill, together with discipline and a responsible attitude at the

flying field. Errors and carelessness in building and flying the model can result in serious personal injury and damage to

property. Since we, as manufacturers, have no control over the construction, maintenance and operation of our products, we

are obliged to take this opportunity to point out these hazards and to emphasise your personal responsibility.

Additional items required:

e.g. MULTIPLEX Micro IPD receiver 35 MHz, A-band Order No. 5 5971

alternatively 40 MHz Order No. 5 5972

or MULTIPLEX RX-7 SYNTH DS IPD receiver 35 MHz, A-band Order No. 5 5885

MULTIPLEX Nano-S servo 2 x required for ailerons Order No. 6 5120

1 x required for elevator

Servo extension lead 3 x 30 cm required for aileron

servos and speed controller Order No. 8 5031

1 x 60 cm required for elevator servo Order No. 8 5032

CC PHOENIX 45 speed controller Order No. 28 9010

3.5 mm gold-contact socket 3 required Order No.8 5211

Flight battery (minimum load capacity approx. 36 A):

MULTIPLEX flight pack, e.g. LiBatt 3/1-2500 mAh (load capacity approx. 45 A) Order No. 15 7191

or MULTIPLEX flight pack, e.g. LiBatt 3/1-3200 mAh (load capacity approx. 64 A) Order No. 15 7136

Adhesive: cyano-acrylate

Use medium and high-viscosity cyano-acrylate glue (”cyano” - not styrofoam cyano) for this model. Epoxy adhesives produce what

initially appears to be a sound joint, but the bond is only superficial, and the hard resin breaks away from the parts under load.

Hot-melt glue (from a glue gun) is an excellent alternative adhesive, especially for servo mounting.

Tools:

Scissors, balsa knife, combination pliers, long pointed-nose pliers, slot-head / cross-point screwdrivers (for the servo output arm

screws).

Specification:

Wingspan 850 mm

Overall fuselage length 1170 mm

All-up weight, min. 880 - 1100 g

Wing area 26 dm²

Wing loading (FAI) min. 34 g / dm²

RC functions Elevator, ailerons and throttle

Important note

This model is not made of styrofoam™, and it is not possible to glue the material using white glue or epoxy. Please be sure

to use cyano-acrylate glue exclusively, preferably in conjunction with cyano activator (”kicker”). We recommend medium or

high-viscosity (thick) cyano. This is the procedure with Elapor®: spray cyano activator on one face of the joint; allow it to air-dry

for around two minutes until the surface appears to be ”dry”, then apply cyano adhesive to the other face. Join the parts, and

immediately position them accurately.

Please take care when handling cyano-acrylate adhesives. These materials harden in seconds, so don’t get them on

your fingers or other parts of the body.

We strongly recommend the use of goggles to protect your eyes.

Keep the adhesive out of the reach of children!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Multiplex Twister 21 4222 Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info