Bedienungsanleitung MundoClima MUPO-07-C9 (Seite 44 von 116) (Deutsch, Englisch, Französisch, Portugiesisch, Spanisch)

726071

Zoom out

Zoom in

Vorherige Seite

1/116

Nächste Seite

8.Don't fill the tank to its full capacity (the liquid injection volume does not exceed 80% of

the tank volume).

9.Even the duration is short, it must not exceed the maximum working pressure of the

tank.

10.After the completion of the tank filling and the end of the operation process, you should

make sure that the tanks and equipment should be removed quickly and all closing

valves in the equipment are closed.

1.The recovered refrigerants are not allowed to be injected into another system before

being purified and tested.

Note: The identification should be made after the appliance is scrapped and refrigerants

are evacuated. The identification should contain the date and endorsement. Make sure

the identification on the appliance can reflect the flammable refrigerants contained in this

appliance.

Recovery:

1.The clearance of refrigerants in the system is required when repairing or scrapping the

appliance. It is recommended to completely remove the refrigerant.

2.Only a special refrigerant tank can be used when loading the refrigerant into the storage

tank. Make sure the capacity of the tank is appropriate to the refrigerant injection

quantity in the entire system. All tanks intended to be used for the recovery of

refrigerants should have a refrigerant identification (i.e. refrigerant recovery tank).

Storage tanks should be equipped with pressure relief valves and globe valves and

they should be in a good condition. If possible, empty tanks should be evacuated and

maintained at room temperature before use.

3.The recovery equipment should be kept in a good working condition and equipped with

equipment operating instructions for easy access. The equipment should be suitable

for the recovery of R290 refrigerants. Besides, there should be a qualified weighting

apparatus which can be normally used. The hose should be linked with detachable

connection joint of zero leakage rate and be kept in a good condition.

Before using the recovery equipment, check if it is in a good condition and if it gets

perfect maintenance. Check if ll electrical components are sealed to prevent the

leakage of the refrigerant and the fire caused by it. If you have any question, please

consult the manufacturer.

4.The recovered refrigerant shall be loaded in the appropriate storage tanks, attached

with a transporting instruction, and returned to the refrigerant manufacturer. Don't mix

refrigerant in recovery equipment, especially a storage tank.

5.The space loading R290 refrigeration can't be enclosed in the process of transportation.

Take anti electrostatic measures if necessary in transportation. In the process of

transport, loading and unloading, necessary protective measures must be taken to

protect the air conditioner to ensure that the air conditioner is not damaged.

6.When removing the compressor or clearing the compressor oil, make sure the

compressor is pumped to an appropriate level to ensure that there is no residual R290

refrigerants in the lubricating oil. The vacuum pumping should be carried out before the

compressor is returned to the supplier. Ensure the safety when discharging oil from the

system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

MundoClima MUPO-07-C9 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info