Bedienungsanleitung Muse M-10 (Seite 1 von 1) (Englisch)

500092

Zoom out

Zoom in

Vorherige Seite

1/1

Nächste Seite

AC power: 230V ~ 50 Hz (CE standard)

DC power: 9V battery type 006P (not provided) for clock back-up system only. An alkaline

type battery is recommended. For optimum performance, this battery should

be replaced every 6 months.

1. Insert the AC power cord (13) into a convenient standard AC wall outlet.

2. Connect the 9V battery inside the compartment at the bottom of the unit (11).

BACK-UP SYSTEM: Ensures that the unit will continue to operate as normal during an

AC power disruption (in order to preserve the battery life the display will not light ). All

clock settings will be kept in the memory, however, the clock time may require adjustment

for exact accuracy. If this battery is not installed, the display will blink to indicate that

you have to redo the time and alarm settings.

GB - 1

GB - 2 GB - 3

LOCATION OF CONTROLS

POWER SUPPLY

SETTING THE TIME

1. Press and hold TIME (6) and press (4) or (5) to adjust to your desired time. Release

TIME (6) to store your setting in memory.

1. Switch the function selector to the ON position (1) and for a better reception, extend the

antenna (12).

2. Adjust the volume (10) and the tone (8) to the desired level.

3. Select your desired radio station (9) and (16).

4. To stop listening to the radio, switch to OFF (1).

LISTENING TO THE RADIO

1. Press and hold the ALARM (7), and press (4) or (5) to adjust your desired alarm time,

then release the ALARM (7) to store your setting in memory.

2. To wake up to the radio follow 1 to 3 in "LISTENING TO THE RADIO", then select the

AUTO position (1). The Alarm indicator will alight (15).

3. To wake up to the alarm sound, select the BUZZER position (1). The Alarm indicator will

alight (15).

SETTING THE ALARM AND WAKE-UP MODE

STOPPING THE ALARM

The alarm is programmed to run for 1hr 59 min.

1. SNOOZE (2): Press to stop the alarm temporarily, the alarm will ring again in 9 min.

2. ALARM (7): The alarm will stop, and will sound again 24 hours later.

3. OFF (1): To turn off the alarm permanently, the alarm LED indicator (15) will go off.

Press SLEEP (3), the sound will come on for 59 min. If you want to change this sleep time,

press and hold SLEEP (3), and use (4) or (5) to adjust to the desired time. If you want to

turn off the music earlier, press SNOOZE (2).

SLEEP TO MUSIC

ATTENTION: To reduce the risk of electric shock, do not remove

the cover. There are no user serviceable parts inside the unit.

Refer all servicing to qualified personnel.

The lightening flash with arrowhead symbol within the triangle is a warning sign

alerting the user of "dangerous voltage" inside the unit.

The exclamation point within the triangle is a warning sign alerting the user of

important instructions accompanying the product.

WARNING

- To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.

MORE INFORMATION

If at any time in the future you should need to dispose of this product please note

that Waste electrical products should not be disposed of with household waste.

Please recycle where facilities exist. Check with your Local Authority or retailer for

recycling advice.(Waste Electrical and Electronic Equipment Directive)

IMPORTANT

M-10CR

User Manual

Digital Alarm Clock Radio

Function Selector

Snooze: Alarm repetition

Sleep: On / set

Minute: set

Hour: set

Time: set

Alarm: set / Stop

Tone (High / Low)

Tuning knob

Volume Control

Battery back-up compartment

FM wire antenna

AC Power cord

Digital display

Alarm ON indicator

Dial scale and pointer

10.

11.

12.

13.

14.

15.

16.

PLEASE READ THE INSTRUCTION CAREFULLY

BEFORE OPERATING THE UNIT

DO NOT THROW BATTERIES IN FIRE !

THE APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING.

ENSURE A MINIMUM DISTANCE OF 5CM AROUND THE APPARATUS FOR

SUFFICIENT VENTILATION.

ENSURE THAT THE VENTILATION IS NOT IMPEDED BY COVERING THE

VENTILATION OPENINGS WITH ITEMS, SUCH AS NEWSPAPERS, TABLE-CLOTHS,

CURTAINS, ETC.

DO NOT PLACE NAKED FLAME SOURCES, SUCH AS LIGHTED CANDLES ON THE

APPARATUS.

TAKE ATTANTION TO THE ENVIRONMENTAL ASPECTS OF BATTERY DISPOSAL.

USE THE APPARATUS ONLY IN MODERATE CLIMATES (NOT IN TROPICAL

CLIMATES).

DO NOT EXPOSE THE APPARATUS TO DRIPPING OR SPLASHING.

DO NOT PLACE OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, ON THE

APPARATUS.

BATTERIES SHALL NOT BE EXPOSED TO EXCESSIVE HEAT SUCH AS SUNSHINE,

FIRE OR THE LIKE.

THE MARKING PLATE IS LOCATED ON THE BACK ENCLOSURE.

MAINS PLUG IS USED AS THE DISCONNECT DEVICE AND IT SHALL REMAIN

READILY OPERABLE. TO BE COMPLETELY DISCONNECTED THE POWER INPUT,

THE MAINS PLUG OF THE APPARATUS SHALL BE DISCONNECTED FROM THE

MAINS COMPLETELY.

THE MAINS PLUG SHOULD NOT BE OBSTRUCTED OR SHOULD BE EASILY

ACCESSED DURING INTENDED USE.

UNDER THE INFLUENCE OF ELECTRICAL FAST TRANSIENT OR/AND

ELECTROSTATIC PHENOMENON, THE PRODUCT MAY MALFUNCTION AND

REQUIRE USER TO POWER RESET.

CR-171FM IB MUSE 001 REV0 - GB.p65 2008-8-8, 11:011

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Muse M-10 Anleitung

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info