M-36 CM
User Manual
MICRO SYSTEM CD/MP3 WITH USB
Please read the instruction carefully before operating the unit.
English
Auto preset
In FM mode, press AUTO on remote control to start automatic preset programming.
Radio frequencies will be browsed and radio stations stored automatically. When all
the available radio stations are stored or all memory locations are full, the auto preset
programming function will stop.
Retrieving the preset stations
In radio mode, press M-/+ on remote control to access a preset station.
GB - 5
PLAY MODES(CD/MP3 ONLY)
Intro playback
Press INTRO button on remote control and “INTRO” appears on display. It will start to play
the first 10 seconds of each track. Press INTRO button again to cancel this function and
“INTRO” disappears on display.
Repeat playback
Press REPEAT button on remote control repeatedly to select a play mode:
- Repeat One : display shows “REP”.
- Repeat folder :display shows “REP ALB”. (MP3 only)
- Repeat All : display shows “REP ALL”.
To cancel repeat playback, press REPEAT button repeatedly until repeat indicator disappears.
Random playback
Press RANDOM button on remote control and “RDN” appears on display. It will play all tracks
in random order. Press RANDOM button again to cancel this function and “RDN” disappears.
Program playback
1.In stop mode, press PROG button on remote control. The display will show “P01” and ashing
“00” (“000” for MP3 ).
2.Use number buttons to input the track number and press PROG button to conform.
3.Repeat above steps to program up to 32 tracks.
4.Press to start program playback.
5.Press STOP on remote control to stop the program playback and cancel this function.
GB - 1
LOCATION OF CONTROLS
1. LED display
2. STANDBY indicator
3. Remote sensor
4. STANDBY button
5. PLAY/PAUSE button
6. SOURCE button
7. , buttons:
Skip / search / Tuning
8. VOL+/- buttons
9. Earphone jack
10.USB port
11. Disc door open button
12.Disc compartment
13.FM antenna
14.AC cord
15.Speaker terminals
16.Speaker box
17.Speaker wire
GB - 2
R1. STANDBY button
R2. MUTE button
R3. 0-9,10+ number buttons
R4. PROG button : To program playback sequences.
R5. ALB-/+ buttons : Folder down /up
R6. VOL-/+ buttons
R7. / /M- (MEMORY -) button:
Skip / search / Preset down
R8. / / M+ (MEMORY +) button:
Skip / search / Preset up
R9. PLAY/PAUSE button
R10. TUN-/+ buttons: Tuning
R11. CD button
R12. USB button
R13. FM button
R14. SOURCE button
R15. INTRO button
R16. REPEAT button
R17. RANDOM button
R18. AUTO/ STOP button
R19. SLEEP button
R20. EQ button
R21. MEMORY button
R22. ST/MONO button
Before throwing any batteries away, consult your distributor who may be able to
take them back for specic recycling.
REMOTE CONTROL
Installing Battery
Insert 2 “AAA/ UM4” batteries to the remote control prior to use. Make sure to match their
polarities (+/-) to the markings inside the compartment.
NOTES:
- Never recharge the batteries, apply heat to them or take them apart.
- If the remote control is not going to be used for a long time, remove the battery to avoid
damage caused by battery leakage corrosion.
- Attention should be drawn to the environmental aspects of battery disposal.
- Do not throw batteries in re!
- Battery shall not be exposed to excessive heat such as sunshine, re or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
1 2
3
4
5
8
0
6
97
10+
PROG
STANDBY MUTE
ALB-
ALB+
VOL+
TUN- TUN+
VOL-
INTRO REPEAT
RANDOM
AUTO / STOP
C
D
U
SB
F
M
SO
U
R
C
E
SLEEP EQ MEMORY ST/MONO
R1
R4
R8
R11
R15
R16
R19
R12
R10
R5
R2
R3
R9
R13
R18
R17
R14
R22
R21
R20
R6
R6
R7
R10
1. Press STANDBY button to turn on the unit.
2. Open the CD door by pushing the CD door Open button .
3. Place the CD with label side up inside the CD compartment and close the CD door.
4. Press SOURCE or CD button to select CD function. The “CD” icon is displayed. After a few
seconds, the total number of track and total play time will appear on display. Press to
start playback.
GB - 3
1.Press STANDBY button to turn on the unit.
2.The function is selected by pressing SOURCE button repeatedly, or pressing CD , USB or
FM button on remote control respectively.
VOLUME
Press VOL-/+ to adjust the sound to comfortable level. The volume level will be displayed for
a few seconds.
MUTE
To cut off the sound from the speakers temporarily, press MUTE button on remote control.
The “MUTE” icon is shown on the display. Press MUTE button again to cancel Mute mode
and restore the sound from the speakers.
EQ
Press EQ button on remote control to toggle among the different sound effects (FLAT /
CLASSIC /ROCK /POP / JAZZ). The selection will show on display for few seconds.
DISC OPERATION
POWER SUPPLY
This set operates on AC 100-240V~ 50/60Hz.
Connect the power cord to a convenient AC wall outlet.
AUDIO CONTROLS
SPEAKER CONNECTION
1. Insert the speaker cables by pushing down the terminal lever of the Left Speaker Terminal
and the Right Speaker Terminal.
2. Connect the speaker to Speaker Terminals, with BLACK wire to BLACK terminals and
WHITE/BLACK wire to WHITE terminals.
-By number buttons 10+, 0-9
Use the number buttons to input the track number, and it will start playback from the selected
track automatically.
If you want to input the track number bigger than 9, use the 10+, 0-9 button.
Example 1, to select the 10th track, rstly press 10+ button once. “_ _” appears on display,
then press number button 1 & 0.
Example 2, to select the 25th track, rstly press 10+ button once. “_ _” appears on display,
then press number button 2 & 5. )
GB - 4
USB OPERATION
1. Press STANDBY button to turn on the unit.
2. Connect an USB device to the USB port on unit.
3. Press SOURCE or USB button to select USB mode. After a few seconds, the total number
of folder and track will appear on display. Press to start playback.
Notes:
- Do not put anything other than a USB device to the port of this unit. Other objects may
damage the USB mechanism.
- The USB socket must not be connected to the computer directly, for that may damage the unit.
- There are many USB devices in the market. We cannot guarantee to support all different
models. Please try another USB device if your device is not supported.
Fast search backward/forward
Press and hold / to search quickly within a track.
Select a folder (mp3 only)
•Press ALB+ on remote control to select the rst track of next folder of your current disc or USB.
•Press ALB- on remote control to select the rst track of previous folder of your current disc or USB.
RADIO
Listening to the radio
1. Press STANDBY button to turn on the unit.
2. Press SOURCE or FM button to select FM Radio mode. “FM” appears on display.
3. Tune to a desired station with / on unit or TUN-/+ on remote control.
Note:
- For a better reception in FM, extend the antenna.
-If a stereo broadcast is received, “ST” is displayed. Press ST/MONO button on remote
control to switch between Mono and Stereo mode.
SLEEP FUNCTION
In sleep mode, the unit will turn off automatically after a specied time.
You can select duration in minutes before the unit turns off automatically.
1.Press SLEEP button on remote control repeatedly to select 90-80-70-60-50-40-30-20-10-
OFF. Release SLEEP button. “SL” icon remains on display.
Notes:
- Sleep time can only be set when the unit is turned ON.
- The sleep function is cancelled when “OFF” is selected, and “SL” icon disappears.
2. Press SLEEP button to check the remaining sleep time.
3.If you want to switch off the radio before sleep ends, press STANDBY button.
GB -6
Continuous use of earphones at high volume can damage the user's
hearing.
USING HEADPHONES (NOT INCLUDED)
NOTE: READ THIS IMPORTANT INFORMATION BEFORE USING YOUR HEADPHONES.
1.Avoid extended play at very high volume as it may impair your hearing.
2.If you experience ringing in your ears, reduce the volume or shut off your unit.
Power supply: AC 100-240V~ 50/60Hz
Power consumption : 20W
Speaker: 8 ohms
MAINTENANCE
Cleaning
WARNING: Disconnect the unit from the mains supply before cleaning.
- Use a soft, dry, clean cloth. Regularly dust the vents at the back or sides.
- Using solvents, abrasive or alcohol-based products risks damaging the appliance.
-If an object or liquid enters inside the appliance, unplug it immediately and have it checked
by an authorized engineer.
Notes on disc
* Do not use irregular shape CDs (example: heart-shaped, octagonal ones). It may result in
malfunctions.
* Do not place more than one disc in the disc compartment.
* Do not try to open the disc compartment during playing.
* Do not touch the lens. Doing so may cause malfunction.
*If there is a scratch, dirt or fingerprints on the disc, it may cause tracking error. Before
playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. Don't store
discs in places with high temperatures or high humidity, they can become warped. After
playing, store the disc in its case.
Important Note
• Before transporting the unit, remove the disc from the disc compartment.
SPECIFICATION
MORE INFORMATION
CAUTION: To reduce the risk of electric shock, do not remove the
cover (or back). There are no user serviceable parts inside the unit.
Refer all servicing to qualify personnel.
The lightening flash with arrowhead symbol within the triangle is a warning sign
alerting the user of “ dangerous voltage” inside the unit.
The exclamation point within the triangle is a warning sign alerting the user of
important instructions accompanying the product.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
GB -7
IMPORTANT!
- The ventilation should not be impeded by covering the ventilation openings with items such
as newspapers, table-cloths, curtains, etc.
- No naked ame sources, such as lighted candles, should be placed on the apparatus.
- The use of apparatus in moderate climates.
- The apparatus should not be exposed to dripping or splashing.
- Ensure a minimum distance of 5cm around the apparatus for sufcient ventilation.
- Do not place objects lled with liquids, such as vases, on the apparatus.
- The marking plate is located on the back of unit.
- Mains plug is used as the disconnect device and it shall remain readily operable. To
be completely disconnected the power input, the mains plug of the apparatus shall be
disconnected from the mains completely. The mains plug should not be obstructed or should
be easily accessed during intended use.
- Under the inuence of electrical fast transient or/and electrostatic phenomenon, the product
may malfunction and require user to power reset.
- Excessive sound pressure from earphones and headphones can cause hearing loss.
CAUTION: Invisible laser radiation when open and interlocks defeated. Avoid exposure to
beam. Class 1 laser product.
If at any time in the future you should need to dispose of this product please note
that Waste electrical products should not be disposed of with household waste.
Please recycle where facilities exist. Check with your Local Authority or retailer for
recycling advice.(Waste Electrical and Electronic Equipment Directive).
Note: Design and specication are subject to change without notice.
Inserting the plug of your headphones into the headphone jack will enable you to listen in
private. When using headphones, the speaker will be disconnected.
1
2
3
7
7
4
8
5
6
11
16
16
13
15
14
17
17
12
10
9
8
Presetting radio stations
The unit can store up to 20 FM stations in its memory.
Manual preset
1. Tune to a desired station.
2. Press MEMORY button on remote control. “01” ashes on display.
3. Press M-/+ on remote control to select a desired preset location. Press MEMORY again to
save the radio station as the selected preset station.
4. Repeat above steps to preset a maximum of 20 stations.
BASIC OPERATION
Play/pause
Press to pause playback. Press again to resume.
Select a track
-By /
Press / to select a track.
3.Keep the volume at a reasonable level even if your headset is an open-air type designed
to allow you to hear outside sounds. Please note that excessively high volume may still block
outside sounds.
Push Speaker terminal tab down to insert wire.
Release tab to lock wire in the terminal.
