Bedienungsanleitung Muse MT-100 BR (Seite 4 von 15) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

655829

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

EN - 1 EN - 2

TURNTABLE STEREO SYSTEMGB

LOCATION AND DESCRIPTION CONTROLS

1. PLATTER

2. SPINDLE

3. 45 RPM ADAPTOR

4. TONE ARM

5. LIFT LEVER

6. DC IN 5V JACK

7. EXTERNAL DEVICE OUTPUT JACK

8. USB PORT

9. REC / : RECORD/ PLAY/PAUSE BUTTON

10. NEXT BUTTON

11. BACK BUTTON

12. MODE BUTTON (TO SELECT PHONO, USB, AUX IN

MODE)

13. AUX IN JACK

14. POWER ON/ OFF AND VOLUME CONTROL (MIN/

MAX)

15. PHONES JACK

16. MODE INDICATOR

17. CARTRIDGE WITH STYLUS

18. TONE ARM REST

19. AUTO STOP (ON/OFF) SWITCH

20. SPEED SELECTOR (33/45/78)

21. PHONOGRAPH LID

22. SPEAKERS

23. CARRYING HANDLE

24. LATCH

POWER SUPPLY

Using the AC adaptor

AC adaptor:

Input 100-240V 50/60Hz 0.5A

Output 5V , 1000mA

The supplied AC adaptor is suitable for use on AC main supplies of 100-240V AC and should only be connected to a

mains supply within these parameters.

Caution:

* The included AC adapter is exclusively intended to be used with this device

* Turn off the power before unplugging the AC adapter to avoid damaging the device.

* In case of unused for long periods, unplug the AC adapter from the outlet.

* Place the unit near the outlet and make sure it is easily accessible. If a malfunction occurs, immediately disconnect the

unit from the wall outlet.

TURN ON/ OFF THE UNIT

1. To turn the unit on, rotate the POWER ON/OFF switch clockwise until a “click” is heard and set the volume (MIN/MAX)

to a lower level.

2. When you have nished the unit, rotate the POWER ON/OFF switch counter-clockwise until a “click” is heard to turn off

the unit.

* The adapter enables you to unplug the unit. It must be easily accessible during use.

* To completely turn off power, unplug the adapter from the wall outlet.

* Never use a damaged power adapter. Place the power cord safely and so that you do not pinch or crush it. If the cable

is damaged, contact a repair service.

LISTEN TO THE PHONO

1. When the unit is on, press MODE button to select the phono mode until function indicator light becomes RED.

2. Remove the stylus cover from the stylus and have released the Tone arm rest.

3. Place a record on the turntable platter and select the desired speed (33/45/78) according to the record.

NOTE: If you are playing 45RPM singles, place the 45 RPM adapter on the center spindle.

4. Push up the lift lever to raise the tone arm and gently move the tone arm to the desired position onto the record, Push

down the lift lever, the tone arm slowly onto the record to start playing the record.

5. Adjust the volume control (MIN/MAX) to your desired level.

6. If the AUTO STOP ON/OFF Switch turned ON, the record will stop automatically when nished (For some few vinyl

records, it will not stop when it does not come to the end.). If Auto Stop switch turned OFF, record will NOT stop

automatically when nished.

IMPORTANT:

Do not turn or stop the Turntable platter manually. Moving or jarring the Turntable platter without securing the Tone Arm

Clamp could result in damage to the Tone Arm or Stylus.

USING THE AUX IN MODE

1. Connect one end of the cable (not supplied) to the auxiliary input connector of the unit(cable not supplied).

2. When the unit is on, Repeatedly press MODE button to select AUX IN mode until indicator becomes blue and red

ashing alternately. Normally use your external audio appliance, the sound automatically goes through the speakers of

your device.

3. Adjust the volume (MIN/MAX) to the desired level.

4. Disconnect the external appliance from the auxiliary input to stop playback.

LISTEN TO THE DEVICE USB

1. Connect a USB device containing MP3 les or MP3 player to the USB port.

2. When the unit is on, Repeatedly press MODE button to select the USB mode until indicator becomes PURPLE ashing.

The USB start to playback automatically. Press to pause, the indicator keep remain purple without ashing.

3. Adjust the volume (MIN/MAX) to the desired level.

4. Press to skip forward to the next track or repeatedly to several tracks. Press return to the beginning of the track,

or press repeatedly to skip backwards several tracks.

5. Press to pause the USB playback.

Remark: When is USB device is plugged into the turntable player, the mode change order is phono USB playback

Aux in.

When is USB device is not plugged into the turntable player, the mode change order is phono Aux in.

Removing the USB device

Please be sure to stop playback and turn the unit OFF before removing the USB device to avoid damage the USB and

system.

HXT-3812 IB MUSE 001 REV0.indd 4 2016/7/21 17:27:22

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Muse MT-100 BR Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info