Bedienungsanleitung Muse MT-101 NG (Seite 4 von 15) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch)

655833

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

EN - 1 EN - 2

TURNTABLE STEREO SYSTEMGB

LOCATION AND DESCRIPTION CONTROLS

1. PLATTER

2. SPINDLE

3. 45 RPM ADAPTOR

4. LIFT LEVER

5. TONE ARM REST

6. SPEED SELECTOR(33/45/78)

7. STANDBY BUTTON

8. AUX IN JACK

9. TONE ARM

10. POWER ON/ OFF AND VOLUME CONTROL

11. POWER INDICATOR LIGHT

12. PHONES JACK

13. CARTRIDGE WITH STYLUS

14. LATCH

15. CARRYING HANDLE

16. SPEAKERS

17. DC IN 9V JACK

18. EXTERNAL DEVICE OUTPUT JACK

19. LED INDICATOR OF PLAY/PAUSE/RECORDING/

DELETE

20. USB PORT

21. PLAY/PAUSE BUTTON

22. RECORD BUTTON

23. BACK BUTTON

24. STOP BUTTON

25. DELETE BUTTON

26. NEXT BUTTON

27. FUNCTION SWITCH(PHONO/AUX-USB)

TURN ON/ OFF THE UNIT

1. To turn the unit on, rotate the ON/OFF switch clockwise until a “click” is heard and set the volume to a lower level.

2. When you have nished the unit, rotate the ON/OFF switch counter-clockwise until a “click” is heard to turn off the unit.

The supplied AC adaptor is suitable for use on AC main supplies of 100-240V AC and should only be connected to a

mains supply within these parameters.

IMPORTANT NOTICE

Automatic standby mode

In a concern of saving energy, when playback has reached to the end or listening volume is set at a very low level and no

control is operated on the device for a period of 2 hours, the unit will automatically switch to Standby mode(power indicator

turns Red).

To switch the unit ON again, press the STANDBY button, the POWER indicator turns Blue.

Caution:

* The included AC adapter is exclusively intended to be used with this device.

* Turn off the power before unplugging the AC adapter to avoid damaging the device.

* In case of unused for long periods, unplug the AC adapter from the outlet.

* Place the unit near the outlet and make sure it is easily accessible. If a malfunction occurs, immediately disconnect the

unit from the wall outlet.

* The adapter enables you to unplug the unit. It must be easily accessible during use.

* To completely turn off power, unplug the adapter from the wall outlet.

* Never use a damaged power adapter. Place the power cord safely and so that you do not pinch or crush it. If the cable

is damaged, contact a repair service.

LISTEN TO THE PHONO

1. When the unit is on, set the PHONO/AUX-USB mode selector to PHONO/AUX position.

2. Remove the stylus cover from the stylus and have released the Tone arm rest.

3. Place a record on the turntable platter and select the desired speed (33/45/78) according to the record.

NOTE: If you are playing 45RPM singles, place the 45 RPM adapter on the center spindle (45RPM adaptor is located in

the holder near the tone arm).

4. Push up the lift lever to raise the tone arm and gently move the tone arm to the desired position onto the record, Push

down the lift lever, the tone arm slowly onto the record to start playing the record.

5. Adjust the volume control to your desired level.

6. The record will stop automatically when nish and you must return the tone arm to the arm rest manually.

IMPORTANT:

- Do not turn or stop the Turntable platter manually. Moving or jarring the Turntable platter without securing the Tone Arm

Clamp could result in damage to the Tone Arm or Stylus.

- The turntable function can not playback if the AUX in cable is connected to the unit.

POWER SUPPLY

Using the AC adaptor

AC adaptor:

Input 100-240V 50/60Hz

Output 9V , 1000mA

USING THE AUX IN MODE

1. Connect one end of the cable to the auxiliary input connector of the unit(cable not supplied).

2. When the unit is on, set the PHONO/AUX-USB mode selector to PHONO/AUX position.

3. Normally use your external audio appliance, the sound automatically goes through the speakers of your device.

4. Adjust the volume to the desired level.

5. Disconnect the external appliance from the auxiliary input to stop playback.

LISTEN TO THE DEVICE USB

1. Connect a USB device containing MP3 les or MP3 player to the USB port.

2. When the unit is on, set the PHONO/AUX-USB mode selector to USB position. It will start to playback automatically,

LED indicator becomes Blue.

3. Adjust the volume to the desired level.

4. Press NEXT to skip forward to the next track or repeatedly to several tracks. Press BACK return to the beginning of the

track, or press repeatedly to skip backwards several tracks.

5. Press PLAY/PAUSE to pause the USB playback, LED indicator blinking.

6. Press STOP to stop the USB playback, LED indicator turns off.

7. During the USB playback, press and hold DELETE for 2 seconds to delete your current track, LED indicator will ashed

twice, once current track deleted that will play the next track automatically.

HXT-3750 IB MUSE 001 REV1.indd 4 2016/4/28 10:03:18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Muse MT-101 NG Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info