PAT TESTING
When used in a workplace, this product must be safety-tested yearly by a qualified electrician
(PAT Tested) in order to comply with the Electricity at Work Regulations. We recommend that it
is PAT tested regularly when used in a domestic environment.
GENERAL SAFETY REQUIREMENTS
Domestic wiring must be tested periodically by a qualified electrician at least once every 10
years or at every change of occupancy. For office and retail premises, and buildings such as
village halls, the wiring must be inspected at least once every 5 years. It is recommended that all
buildings be fitted with smoke alarms (it is mandatory for new buildings).
III. Operation
Before use check that the voltage power corresponds to the one shown on the appliance’s
nameplate.
Make sure you are using the correct plug.
Mechanical mode ( button)
Press button to operate, the unit will start working and blow cool air;
Press button for the second time, the unit will blow warm air (1000W).
Press button for a third time, the unit blow hot air (2000W).
Press button for a fourth time, The unit will stop working.
Switch on again, the unit will return to working mode and blow cool air. Cycle option.
Attention: it is recommended that you let the unit blow cool air for 30 seconds and then turn the
unit off.
All working modes will be shown on the LCD display screen.
Mechanical mode ( timer button)
From 1h to 8h . The timer operates from 1h-2h-3h-4h-5h-6h.....until the 8h
Mechanical mode ( „+“,“-„ )
Temperature adjustor
Remote control operation; see photo below
Press button to start working
Press function button to choose 1000W or 2000W power
Press timer button. Operates as per the timer on the panel
Press ‘+”& ‘-’ to adjust the temperature.
4
