07Electric Underfloor Heating
3.2 Installation: Screed
Position the mat as described in section 3.0.
Attach the mat to the floor with adhesive or
double sided tape (fig 15 -17).
Test the mat again with a multimeter (section 4.0)
and write down the readings on the control card.
AT THIS STAGE YOU SHOULD HAVE TESTED
YOUR MAT 3 TIMES.
Read the instructions of the levelling screed, check
that the product is suitable for floor heating and
follow the laying instructions of the manufacturer.
Observe the manufacturer’s drying time and then
apply the floor covering (fig 18).
PLEASE NOTE: Applying 2 separate levelling layers, one on top of the other, is NOT
RECOMMENDED because it can cause unnecessary tension in the floor.
Fig. 15 Fig. 16
Fig. 17
Fig. 18
