Bedienungsanleitung NAD c422 (Seite 7 von 68) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch)

161019

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

ENGLISH

FRANÇAISDEUTSCHNEDERLANDSESPAÑOL

ITALIANO

PORTUGUÊS

SVENSKA

8Preset/Tune - The Search/Preset button toggles between two

different modes:

a) Preset mode: In this mode you can use the Tune/Preset button

(No. 10) to select a Preset. When Preset Mode is selected

"PRESET" will scroll once through the display and the PRESET

indicator lights up in the display.

b) Tune mode: By rotating the Preset/Tune control (10) or

you can engage automatic or manual tuning respectively

down or up the frequency band. When Tune mode is selected,

"TUNE" will scroll through the display once.

9 Display Area - The display area gives all vital information on the

status of the tuner.

Displayed are:

• Band and frequency of current station, RDS PS (station name), or

RDS Radio Text. The latter two only if RDS is available; select using

the Display button (No. 7).

• If an FM Stereo broadcast is received.

• If the FM station also broadcasts RDS.

• If "Memory" has been engaged

•Preset number if the current station is stored in the tuner’s

memory bank.

• If Blend and FM Mute/Mode are switched On.

• Radio Signal Strength. The bars just below "ANTENNA" indicate

the radio station’s signal strength. The more bars are lit, the

stronger the station.

NOTE

The infrared sensor, which receives commands from a remote control

(not supplied), is located on the left side of the display window. There

must be a clear line-of-sight path from the remote control to this

window; if that path is obstructed, the remote control may not work.

10 Preset/Tune Control - The function of this control depends on the

tuning mode selected with the Preset/Tune button (No. 8). The

PRESET/TUNE Control operates when the rotational switches are

engaged; either clockwise or counter clockwise, and the contact

switches are engaged. The Preset/Tune button toggles between the

two operational modes:

a) Preset mode (indicated in the display area): Rotate the

Preset/Tune control to the left to scroll to a lower number Preset;

rotate the Preset/Tune control to the right to scroll to a higher

Preset number. This is a "wrap-around" function, so that going

from the highest number Preset, the tuner will go to the lowest

Preset number or vice-versa either up or down when tuning.

b) Tune mode: Rotate the Preset/Tune control in either direction

for more than 1 second to engage automatic tuning respectively

up or down the frequency band. The tuner will search

automatically for the first reasonably strong radio station, where

it will stop. Rotate the Preset/Tune control again for 1 second to

start searching again.

By briefly rotating the Preset/Tune control in either direction you will

engage manual tuning respectively up or down the frequency band

for precise tuning to a specific frequency. With each brief rotation,

the tuner will take 0.05 MHz steps on FM so you can accurately tune

into the desired frequency. For AM the tuning steps are set at 10 kHz

(120V version) or 9 kHz (230V version).

This tuning mode can also be useful when trying to receive a radio

station, which is too weak for the auto search mode. When tuned

accurately to a station, "TUNED" will light up in the display. The

muting circuit however may suppress very weak radio station signals.

If such a very weak station is in stereo it will have a high level of

background hiss. Switching to Mono Mode and disengaging the

muting circuit by depressing the FM MUTE/MODE button (No. 5) will

allow the station to be heard and will cancel most or all of this

background noise.

NOTES

Automatic tuning is available on both FM and AM.

Some NAD system remote controls, compatible with the NAD C 422,

have Preset Up and Down functions. Even if the C 422 is in Tune

Mode, this remote control’s Preset Up and Down buttons will only

change presets. The Preset/Tune and buttons are also

used in conjunction with the Memory (No. 4) and Display (No. 7)

buttons to add and memorise user defined names to Presets. Refer

to the separate chapter "Storing, recalling and naming Presets" for

more information.

C422 manual - 6 8/8/03 5:32 PM Page 7

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD c422 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info