Bedienungsanleitung NAD C516BEE (Seite 10 von 14) (Englisch)

577603

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

CD-R AND CD-RW AUDIO DISCS

The C 516BEE can play back CD-R or CDRW audio discs that have been

recorded on a computer or CD recorder. The quality of CD-R, CD-RW audio

discs varies widely which may aect playability. Some factors that aect

playability:

• The quality of the disc itself. Generally speaking, CD-R, CD-RW blanks

from well-renowned companies give better results than unbranded

ones.

• The quality of CD-recorder or computer CD re/writer. Some recorders

and writers produce better results than others.

• The CD-R and CD-RW were created with high-speed writing. In general,

the quality of a CD-R or CD-RW is better when produced at a lower

speed against a higher speed on the same recorder or re/writer.

PLAYING MP3/WMA FILES

The C 516BEE can play MP3/WMA formatted recordings on CD-R or CD-RW

discs. You may mix any of the le types on the disc. Using the CD 7 remote

control, one can select through the MP3/WMA folders and les as well as

start playback through the following steps

1 Load the applicable disc.

2 Press [FOLDER ] to select desired folder. Press [ENTER].

3 Press [FILE ] to select desired le number. You must be at STOP or

playback mode to access both folders.

4 Press [ENTER] to start playback. For each le type being played, the

C 516BEE will display the le type at the VFD and a corresponding icon

at the VFD. Information about the Song Title, Album and Artist name, if

available, will scroll through the VFD during playback.

NOTES

• Thelenumberisrecognizedperdisc,notperfolder–thatis,the

numberassignedtoeachlecorrespondstotheirsequenceinthedisc.

• Ifyouwanttoselectlenumber“9”inadiscwherethereare100ormore

MP3/WMAles,press“0”twiceandthen“9.”

PROGRAMMING

The program function enables you to store your favorite tracks from any

disc in the player memory. When programming a sequence of tracks, the

C 516BEE must be in STOP mode. Using the CD 7 remote control, enter your

desired program sequence through the following steps

1 Press [PROGRAM]. The display indicates “P01 T00”. The “00” in the “T00”

keeps on blinking, meaning that the player is awaiting the rst Program

entry.

2 Use the Direct-Entry numeric keypad buttons to enter the rst track

in your planned sequence. Upon entering the track number, the VFD

will briey show the total number and total time of the currently

programmed tracks like “TTL 01 3:25”.

3 The display will revert to show “P02 T00,” indicating that the player is

ready for your second program entry. Upon entering the second track,

the VFD will again briey show the total number and total time of the

currently programmed tracks like “TTL 02 6:45” – “TTL 02” indicates that

there are now a total of two programmed tracks and “6:45” is the total

playback time of both programmed tracks.

4 Repeat steps 2 and 3 to select and store other track numbers in

memory, up to a maximum of 40 entries. If you attempt to program

more than 40 tracks or les, “P-FULL” will be displayed in the VFD.

5 Press [PROGRAM] to end or nalize the program – the VFD will show the

last programmed number and track.

6 Press to start program playback.

NOTES

• TheprocedureforprogrammingMP3/WMAlesisthesameasabove

withanexceptionatstep2and3–thetotalnumberofprogrammed

lesandtotalplaybacktimewillnotbedisplayedduringprogramming.

• Ifyouwanttoselectlenumber“9”inadiscwherethereare100ormore

MP3/WMAles,press“0”twiceandthen“9.”

• PressingSTOPkeyatanytimeduringtheprogrammingprocedurewill

puttoaSTOPthesequenceandclearallthecurrentlyprogrammed

tracksorles.VFDwillrevertbacktodisplayingthetotalnumberof

tracksandtotalplaybacktimeforaudioCDandtotalnumberoflesfor

MP3/WMA.

• PressingSTOPkeytwiceduringprogramplaybackwillresulttohaving

the whole program list deleted.

REVIEW / EDIT PROGRAM LIST

1 Initiate review or edit of your program entries through either of the

following initial steps

• If you are still in programming mode, press [PROGRAM].

• If during program playback, press [STOP] once then [PROGRAM].

2 The VFD will show the rst Program Number and the corresponding

“blinking” programmed track.

3 To change the programmed track of a particular sequence, use the

Direct-Entry numeric keypad buttons. Press [SKIP or ] to move

forward or backward the programmed tracks as well as review the list

and change if so desired.

4 If you want to delete a particular program sequence during program

review, press [DELETE] key.

5 After nalizing your program changes or completing your review, press

[PROGRAM] again.

PROGRAM PLAYBACK

1 To play the stored program, press [PLAY] while you are in “PROGRAM”

mode. “PROG” icon will appear in the display, indicating that a stored

program is being played. During Program Play, the SKIP buttons will

access only the tracks in the program list.

2 If you want to play only a portion of a stored program, initiate play and

press SKIP to jump over the programmed tracks that you don’t want to

hear.

STOP OR DELETE PROGRAM

1 To terminate Program play, press [STOP] once. The stored track list

remains in memory. If you want to play the program again, simply press

[PLAY].

2 To clear the program memory, perform any of the following steps

• Press [STOP] twice during program playback.

• Press [OPEN] to open the disc tray.

• Switch OFF the power.

OPERATION

USING THE C 516BEE  FEATURES

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

NAD C516BEE Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD C516BEE

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info