Bedienungsanleitung NAD c715 dab (Seite 16 von 24) (Englisch)

158474

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

AUTOMATIC PRESET

Preset stations may also be programmed automatically for the entire FM (or

AM) band.

1 Toggle the [BAND] button to select AM or FM band.

2 Press and hold SR 7’s [MEMORY] key. Release [MEMORY] key when “Auto

Memory” starts to blink in the VFD. Up to 30 of the best received FM

stations (or 30 AM stations) will be automatically stored.

CHOOSING THE FM MODES

In FM mode, the front panel [FM MODE] key is a dual-purpose control. In

the normal position, (“STEREO” and “TUNED” icons are illuminated in the

VFD) only the stations with a strong signal can be listened to and the noise

between stations is muted.

Pressing the [FM MODE] button again (‘STEREO” icon is extinguished; only

“TUNED” is illuminated) allows distant and potentially noisy stations to be

received. Noise is reduced if the FM station signal level is less than the FM

stereo threshold (since mono FM is inherently less noise-prone) though at

the sacrice of stereo eect.

RDS OPERATION

Radio Data System (RDS) transmits station call signs or network information,

station program type, text messages about the station or specics of a

musical selection and the time.

Not every FM station incorporates RDS in its broadcast signal. In most areas

you will nd from one to several RDS-enabled stations, but it is by no means

impossible that your favorite stations will not be broadcasting RDS data.

RDS MODE OPTIONS

When an RDS-enabled FM broadcast is tuned, a “RDS” icon will illuminate in

the C 715’s VFD.

Toggle [RDS MODE] to show the following:

PROGRAM SERVICE

“Program Service” will blink for about 3 seconds and then the program

service name or a station’s name will be displayed. “P S” which stands for

“Program Service” will be displayed in the upper left side of the VFD. If there

is no program service data, the frequency will be displayed.

RDS CLOCK TIME

The current time of the day will be displayed as transmitted by the station.

It will take 3-5 seconds for the time to appear. In the meantime, the word

“RDS CLOCK TIME” will ash in the display. When available, the time is

then displayed. Note that the accuracy of the time message is set by the

radio station, not by the C 715. “C T” which stands for “Clock Time” will be

displayed in the upper left side of the VFD. If there is no time data supplied,

“00:00” will be displayed”.

RDS PROGRAM TYPE

Program Type (PTY) allows users to nd similar programming by genre.

Please nd the section below about “PROGRAM TYPE (PTY)” for more

information about RDS Program Type.

RDS RADIO TEXT

A Radio Text message containing special information from the RDS station

will scroll through the VFD (up to 64 symbols can be displayed). It will take

3 takes seconds for the text message to appear. In the meantime, the word

“RDS RADIO TEXT” will ash in the display. When available, the Radio Text is

then displayed. “R T” which stands for “Radio Text” will be displayed in the

upper left side of the VFD. If no Radio Text is available, the display will show

the Program Service.

TRAFFIC ANNOUNCE

When selected, “TRAFFIC ANNOUNCE” will blink for 3 seconds. After 3

seconds, the C 715 will scan (SEARCH and a blinking “ > ” is displayed) the

FM band searching for available trac announcements. “T A” which stands

for “Trac Announce” will be displayed in the upper left side of the VFD.

“TRAFFIC ANNOUNCE (T A)” mode is switched to Program Service (P S)

mode when a trac program is found. Once a station transmitting trac

program signal is selected, the C 715 will stop searching for trac program

and then switch to “Program Service” mode.

OPERATION

USING THE C 715  TUNER MODE

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD c715 dab Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD c715 dab

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info