Bedienungsanleitung NAD CI 980 (Seite 5 von 12) (Englisch)

745047

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

INTRODUCTION

GETTING STARTED

QUICK START

Refer to the supplied CI 980 Quick Setup Guide for basic instructions in

setting up your new NAD CI 980. The following important notes must also

be observed when setting up your CI 980.

IMPORTANT SETUP NOTES

• Before setting up or making connections, ensure that the CI 980 and

other devices to be connected to CI 980 are unplugged or powered

down.

• Connect the speaker cables to the supplied speaker connectors by

following the corresponding ZONE (ZONE 1- 4) speaker terminal

connections (R +/-, L +/-) as reected in the CI 980 rear panel.

• Bare wire or loose strands from the speaker cables must not touch the

rear panel or other speaker terminals.

• After installing the speaker cables to the supplied speaker connectors,

plug in the speaker connector to corresponding ZONE (ZONE 1- 4)

speaker terminal of CI 980.

• Connect corresponding end of the mains power cord to the AC mains

input of CI 980 and the plug connected to a mains power source.

• Set the POWER switch at the rear panel to “ON” setting (TRIGGER OFF/

ON/AUTO switch set to OFF position). The Standby LED indicator will

illuminate amber. Press the STANDBY button to turn ON the CI 980. The

Standby LED indicator will turn from amber to blue.

SAVE THE PACKAGING

Please save the box and all of the packaging in which your CI 980 arrived.

Should you move or otherwise need to transport your CI 980, this is by

far the safest container in which to do so. We’ve seen too many otherwise

perfect components damaged in transit for lack of a proper shipping

carton, so please: Save that box!

NOTES ON INSTALLATION

• Place your NAD CI 980 on a rm, level surface.

• Avoid placing the unit in direct sunlight or near sources of heat and

damp.

• Do not place the unit on a soft surface like a carpet.

• Do not place the CI 980 in an enclosed position such as a bookcase

or cabinet that may impede the air-ow through the ventilation slots.

Allow adequate ventilation.

• Make sure the unit is switched o before making any connections.

• The RCA sockets on your NAD CI 980 are color coded for convenience.

Red and white are Right and Left audio respectively. Use high quality

leads and sockets for optimum performance and reliability.

• Ensure that leads and sockets are not damaged in any way and all

sockets are rmly pushed home.

• Should water get into your NAD CI 980, shut o the power to the unit

and remove the plug from the AC socket. Have the unit inspected by a

qualied service technician before attempting to use it again.

• Use a dry soft cloth to clean the unit. If necessary, lightly dampen the

cloth with soapy water. Do not use solutions containing benzol or other

volatile agents.

DO NOT REMOVE THE COVER; THERE ARE NO USERSERVICEABLE

PARTS INSIDE.

ENGLISHFRANÇAISESPAÑOLITALIANODEUTSCHNEDERLANDSSVENSKAРУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD CI 980 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD CI 980

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info