Bedienungsanleitung NAD M17 AV (Seite 10 von 38) (Englisch)

562261

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

8 MONITOR OUT (COMPOSITE VIDEO)

• Connect to the video input of a monitor/television using quality

dual-RCA connectors designed for video signals.

9 ZONE 2-3-4

• The M17 has three congurable Zones – Zone 2, Zone 3 and Zone

4. The Zone feature allows one to simultaneously experience in

a dierent zone or location of the house a Source assigned to a

particular zone.

• Send zone selected audio and video output to the corresponding

audio and video input of another zone. Use high quality patch

cables to reduce noise pickup over long distance runs.

• For a better understanding of zone settings, study below the section

about “Zone Controls” of the “Main Menu” discussion as well as the

item about “Zone Setup” under the “Setup Menu” literatures.

NOTES

• “Zone 4” is audio only and not associated with any video input sources.

• Zone 2 and Zone 3 video output are available only if the corresponding

zone’s video source is composite video.

10 DIGITAL AUDIO IN (COAXIAL IN 1-4, OPTICAL IN 1-4)

• Connect to the corresponding optical or coaxial digital output of

sources such as CD or BD/DVD players, digital cable box, digital

tuners and other applicable components.

• Coaxial and Optical digital input association is congurable via the

Source Setup item of the Setup Menu OSD.

DIGITAL AUDIO OUT (COAXIAL OUT 1-2, OPTICAL OUT 1-2)

• Connect the optical or coaxial DIGITAL AUDIO OUT to the

corresponding digital audio input of compatible devices such as

receivers, computer soundcard or other digital processors.

11 ETHERNET/LOCAL AREA NETWORK (LAN) PORT

LAN connection must be setup for wired connection to be established.

Set up a Wired Ethernet broadband router with broadband internet

connection. Your router or home network should have a built-in DHCP

server to consummate the connection.

• With Ethernet connection established, you can now control the

M17 using the NAD AVR Remote App that can be downloaded

from the Apple App store to your iOS device (iPhone, iPad or iPod

Touch). Ensure that your iOS device with the NAD AVR Remote App

is connected to the same network as the M17.

• The NAD AVR Remote App automatically discovers your network-

connected M17 and walks you through controlling and adjusting

fundamental functions including power, volume, source selection

and other basic setup features.

• The IP address of your network-connected M17 can be obtained.

Press and hold “Main” item in the front panel display menu until

below information is displayed.

NOTES

• NAD is not responsible for any malfunction of the M17 and/or the

internet connection due to communication errors or malfunctions

associated with your broadband internet connection or other connected

equipment. Contact your Internet Service Provider (ISP) for assistance or

the service bureau of your other equipment.

• Contact your ISP for policies, charges, content restrictions, service

limitations, bandwidth, repair and other related issues pertinent to

internet connectivity pertinent to internet connectivity.

12 HDMI (HDMI IN 1-6, HDMI MONITOR OUT 1-2)

• Connect the sets of HDMI input to the HDMI OUT connectors of

source components such as DVD player, BD player or HDTV satellite/

cable box.

• Connect the HDMI MONITOR OUT 1 and/or HMDI MONITOR OUT

2 to compatible HDTV or projector with HDMI input. Both HDMI

output ports display simultaneously the same audio/video source.

WARNING

Before connecting and disconnecting any HDMI cables, both the M17

and the ancillary source must be powered OFF and unplugged from the

AC outlet. Failure to observe this practice may cause permanent damage

to all equipment connected via HDMI sockets.

13 UNSWITCHED AC OUTLET (120V version model only)

• With M17 switched ON or at standby mode, mains power is always

available at this outlet.

• This outlet can be used for components that may require

continuous supply of AC mains; some tuners require uninterrupted

mains supply to retain preset memory, for instance.

• The total draw of all devices connected to this outlet must not

exceed 120 watts.

• Mains power at this outlet can be shut down by switching OFF the

M17 via the rear panel POWER switch.

14 AC MAINS INPUT

• The M17 comes supplied with a separate detachable mains power

cord. Before connecting the plug to the mains power source,

connect rmly rst the other end to M17’s AC Mains input socket.

• Always disconnect the mains power plug from the mains power

source rst, before disconnecting the cable from the M17’s AC

Mains input socket.

• Connect only to the prescribed AC outlet, i.e., 120V 60 Hz (for 120V

version models only) or 230V 50 Hz (for 230V version models only).

15 POWER

• Supply the AC mains power to the M17.

• When the POWER switch is set to ON position, the M17 goes to

standby mode as shown by the amber status condition of the front

panel Power indicator. Press the front panel o (Standby) button or

HTRM 2 remote control’s [ON] button to switch ON the M17 from

standby mode.

• If you intend not to use the M17 for long periods of time (such

as when on vacation), switch o the POWER switch. With POWER

switched o, neither the front panel o (Standby) button nor

HTRM2 remote control’s [ON] button can activate the M17.

IDENTIFICATION OF CONTROLS

REAR PANEL

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

NAD M17 AV Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M17 AV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info