Bedienungsanleitung NAD M17 V2i (Seite 16 von 32) (Englisch)

745036

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH

VIDEO INPUT

All available HDMI sources can be assigned as video input to a particular

Source. Select “O” if it is intended not to assign any video input to a

particular Source.

HDMI $ HDMI 1, HDMI 2, HDMI 3, HDMI 4, HDMI 5

Previous $ Display or retain preceding video.

A/V PRESET

A particular Source can be assigned a stored Preset. The parameters set up

in the selected Preset number will be adopted into the particular Source it

is assigned (Please refer to the separate section on “A/V Presets” for further

understanding of Preset settings).

If it is desired not to assign the particular Source a Preset setting, select

“None”.

TRIGGER OUT

The Trigger Out for a particular Source is dependent upon the

congurations done in a separate menu on Trigger Setup (See “Trigger

Setup” below). If “Source Setup” is assigned to all three Trigger output

(Trigger Out 1-3) in the separate “Trigger Setup” menu window, a particular

Source can have the following Trigger Out combinations

Trigger Out: Trigger1 $ Trigger2 $ Trigger 1+2 $ Trigger 3 $

Trigger 1+3 $ Trigger 2+3 $ Trigger1+ 2+3

Above combinations are dependent upon the assignment of “Source

Setup” for all Trigger 1 Out, Trigger 2 Out or Trigger 3 Out settings at the

“Trigger Setup” menu. If only Trigger 1 Out is set “Source Setup”, only

“Trigger 1” and “None” are available options at Trigger Out setting for a

particular Source.

None: Particular Source is not assigned any Trigger Out option.

IMPORTANT

For “Trigger Out” to be assignable at “Source Setup” menu, make sure to

carry out following.

• In the separate “Trigger Setup” menu, assign Trigger 1 Out, Trigger 2 Out

or Trigger 3 Out to “Source Setup.”

• “Trigger Out” will not be congurable and remain at “None” setting if at

the separate “Trigger Setup” menu, none of the Trigger 1 Out, Trigger 2

Out or Trigger 3 Out settings is allocated to “Source Setup.”

SPEAKER SETUP

After connecting all ancillary sources and other combinations, the Speaker

Setup menu will guide you on how to manage and setup your speakers in

order to achieve optimum sound acoustics in your listening environment.

The following are the Speaker Setup Menu sections.

IMPORTANT NOTICE

The M17 is an AV Surround Sound Preamplier and therefore has no

speakers. The mention of “Speaker(s)” in this manual refers to the

speakers of your external amplier as interfaced with the M17.

SPEAKER CONFIGURATION

Every surround-sound system requires “bass-management” to direct low-

frequency content from any or all channels to the speakers best able to

reproduce it. For this function to operate correctly, it is important that you

correctly identify your speakers’ capabilities. We use the terms “Small” and

“Large” (and “O”) but note that physical size may be irrelevant.

• A “Small” speaker is any model, regardless of physical size, that lacks

signicant deep-bass response, that is, below about 200 Hz.

• A “Large” speaker is any full-range model; that is, one with deep-bass

response

• An “O” speaker is one that is not present in your system. For example,

you might not have any surround-back speakers installed; in that case,

you would set the “Back” setup item to “O”.

• For “Height” speakers, selecting “O” option for “Height 1” will

automatically cut o both Height 1 and Height 2 Audio output.

The Speaker Conguration is “global”; that is, it remains in force with all

inputs and in all listening modes. However, speaker settings are part of the

M17’s Preset system. Consequently, multiple speaker settings can be stored

for easy recall as dierent types of recordings or listening modes require.

Speaker Conguration can be managed and adjusted by pressing

a combination of [S] and then [D/F] keys. Set “Front”, “Center” and

“Surround” to “Large”, “Small” or “O” as your subsystem’s speakers require.

Set “Back” to either “Stereo” or “Mono” as per speaker availability. Set

“Subwoofer” to “On” or “O, ”selecting “On” only if you have a subwoofer

connected to the M17’s SUBW1 or SUBW2 output jack. If “Subwoofer” is set

to “O”, “Front” speakers will automatically be set to “Large”.

HEIGHT 1/HEIGHT 2

“Height 1” and “Height 2” AUDIO PRE-OUT can be connected to the audio

input of an external power amplier hooked up with up to 4 Height

speakers.

Height1/Height 2 settings must be set to “On” at the “Speaker

Conguration” menu to activate the additional Height speakers and be

congurable.

OPERATION

USING THE M17  SETUP MENU

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M17 V2i Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M17 V2i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info