Bedienungsanleitung NAD M17 V2i (Seite 29 von 32) (Englisch)

745036

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

ENGLISH

LOADING CODE-LIBRARIES

The HTRM 2 can store a dierent library of default NAD codes for each of

its Device Selector “pages.” If the original default library does not control

your NAD CD player, tape deck, BD player, or other component, follow the

procedure below to change the code-library.

Begin by ensuring that the component you wish the HTRM 2 to control

is plugged in and powered-up (“on,” not merely in standby). To enter the

HTRM 2s Library Mode, simultaneously press-and-hold for 3 seconds both

the desired Device Selector key and the [A/V PSET] key, until the Learn LED

turns green.

While keeping the HTRM 2 pointed toward the component, enter the rst

appropriate three-digit code-library number from the table below. Press

[OFF]. If the component turns o, press [ENTER] to accept that code-library

number and exit the Library Mode. If the component does not turn o,

enter the next three-digit code-library number from the table.

When you enter the correct number the component will turn o; press

[ENTER] to accept that code library number and exit the Library Mode.

LIBRARY

CODE

NAD PRODUCT

DESCRIPTION

LIBRARY

CODE

NAD PRODUCT

DESCRIPTION

100

Receiver/Processor (Discrete

ON/OFF)

300 Tuner

101

Receiver/Processor (Toggle

ON/OFF)

301 L75, L76 Tuner

102 S170 302 L70 Tuner

103 L75 303 L53 Tuner

104

Second Zone Commands

(Zone 2)

304 L73 Tuner

3112 Zone 3 305 C425

4112 Zone 4 306 C445

105 L70 307 Txx5 Series Tuner

106 L76 400 Tape Deck B

107 118 401 TAPE Deck A

108 L53 500 TV 280

109 L73 501 MR13

110 Stereo Receiver / Amplier 502 MR20

111 Stereo Second Zone 503 PMR45

112 Txx5 Series 600 T535, T562, T585, M55

200 CD Player 601 T550, L55

201 CD Player (old) 602 T512, T531, T532, T571, T572

202 5170, 5240, 5340 603 L70, L73 BD

203 5325 604 L56

204 5060 605

T513, T514, T515, T517,

T524, T533, T534

205 M5 606 L53 BD

SEARCH MODE

If none of the codes from the table, when entered, turns on the

component, and if you are quite sure you have followed the above

procedure completely and carefully, you may want to try the “search”

method as follows:

Enter Library Mode by simultaneously pressing-and-holding for 3 seconds

both the desired Device Selector key and the [A/V PSET] key, until the Learn

LED turns green. Now press-and-hold the HTRM 2’s [R] or [T]) key; the

remote will step through all the available codes at a rate of approximately

1 per second.

When the component turns o, immediately release the cursor key; press

[ENTER] to accept that code-library and exit the Library Mode. Try a few

commands; should you prove to have stepped past the needed code-

library, re-enter the Library Mode and use the cursor key to step back to it.

NOTE

It is possible that search mode will nd code-libraries that operate, at

least partially, some other brand (non-NAD) components. You may

certainly exploit such capabilities as you nd them. However, since we

can only ensure the completeness or accuracy of NAD code-libraries, we

cannot support the HTRM 2’s operation with other-brand components.

CHECKING CODE-LIBRARY NUMBER

You can check the current code-library on any Device Selector key as

follows. Enter Library Mode by simultaneously pressing-and-holding for

3 seconds both the desired component’s Device Selector key and the

[A/VPSET] key, until the Learn LED turns green. Press the [DISP] key; the

HTRM 2 indicates the current code-library by ashing its [DAC], [CUSTOM],

and [MACRO] keys.

For example, to indicate code-library #501, the HTRM 2 will ash [DAC] 5

times, pause, and then ash [MACRO] once. You might wish to make a note

of your components’ code-library numbers.

OPERATION

USING THE HTRM 2 REMOTE CONTROL

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M17 V2i Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M17 V2i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info