Bedienungsanleitung NAD M33 (Seite 14 von 26) (Englisch)

745037

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

ENGLISH

• Source (Detailed): display Source name plus other information like

volume level.

• Digital VU Meter

• Analog VU Meter

VU Meter monitors or reects audio input level of current BluOS

source. If “Mute” is enabled, the VU meter will not turn o or go to

minimum level as it is the audio output that is muted.

5 Auto Sense (not applicable for Phono and BluOS Sources): At

enabled mode, unit wakes up from standby mode when triggered by

an applicable active Source.

6 MQA Pass-through (applies only to Coaxial and Optical Sources):

Enable MQA Pass-through for the M33 to act as MQA decoder or

renderer when MQA certied CD player or other MQA certied devices

are connected to coaxial or optical input ports.

7 A/V Mode: By connecting your TV or other video sources to your

M33 through coaxial, optical or HDMI input ports, you can listen to

your favorite shows or movies through your BluOS system. Grouping

multiple BluOS devices from one of these inputs can require

an abundance of network trac. A/V mode creates a short and

unobtrusive buer to your audio to ensure your BluOS system stays in

sync with your video even with slower or cluttered networks.

Enabled: With A/V Mode enabled on your input source, audio delay

will be automatically adjusted to keep your grouped BluOS devices

in sync with the video source connected. Use the Lip-sync delay

option below the A/V Mode setting to manually select the delay

time to better suit the speed of your network.

Disabled: When your M33 is connected to an audio source without

video, such as a turntable or CD player, the A/V Mode setting

should be disabled.

8 Lip-sync delay: With A/V Mode enabled, “Lip-sync delay” can be

adjusted to ensure your audio is staying in sync over your network

with the original video source. By varying “Lip-sync delay” from 50ms to

150ms, one can delay the audio output to synchronize it with the video

image of the corresponding source.

9 Hide Source: Activate or deactivate selected Source

10 ADC Sample Rate (applies to Analog Sources only)

An analog audio input is converted to digital signal by making use of

M33’s superb circuitry called analog-to-digital converter (ADC).

Using this ADC Rate feature, the sampling rate of the resulting digital

audio signal ((available when using BluOS multi-room streaming)) can

be converted into three levels - 48K, 96K and 192K. Make sure that the

associated equipment will be able to handle the applicable digital

audio signal level.

11 Analog Gain (applies to Analog Sources only)

Gain adjustment allows all sources to play back at the same volume

level so you don’t need to adjust the volume every time a new source

is selected. It is generally preferable to reduce the level of the loudest

source rather than making louder the softer sources.

12 Phono Type (applies to Phono Sources only)

Select either MM (moving magnet) or MC (moving coil) depending

upon the connected turntable’s phono cartridge.

OPERATION

USING THE FRONT PANEL DISPLAY

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD M33 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD M33

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info