Bedienungsanleitung NAD T 567 (Seite 10 von 30) (Englisch)

493500

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

1 AC MAINS INPUT

• The T 567 comes supplied with a separate AC Mains cable.

• Before connecting the cable to a live wall socket, ensure rst that it

is rmly connected to the T 567’s AC Mains input socket.

• Always disconnect the AC Mains cable plug from the live wall socket

rst, before disconnecting the cable from the T 567’s Mains input

socket.

2 LOCAL AREA NETWORK (LAN) PORT

• Using a commercially available straight LAN cable (Category 5/

CAT5 or better with RJ45 connector), connect this LAN port to the

corresponding port of your modem or router. By connecting the

T 567 to broadband internet, you can playback a disc that oers BD-

Live function.

• Refer also to the “NETWORK SETUP MENU” section of “USING THE

T 567” under the “OPERATION” main heading.

NOTES

• NAD is not responsible for any malfunction of the T 567 and/or the

internet connection due to communication errors or malfunctions

associated with your broadband internet connection or other connected

equipment. Contact your Internet Service Provider (ISP) for assistance or

the service bureau of your other equipment.

• Contact your ISP for policies, charges, content restrictions, service

limitations, bandwidth, repair and other related issues pertinent to

internet connectivity.

• Some disc related material available through internet may not be

compatible with the T 567. Contact the producer of the disc for questions

about such content availability or compatibility.

3 IR IN

This input is connected to the output of an IR (infrared) repeater

(Xantech or similar) or the IR output of another component to allow

control of the T 567 from a remote location. Most NAD products with IR

OUT are fully compatible with the T 567.

4 HDMI OUT

• Using a HDMI cable (not supplied), connect the HDMI OUT jack to

the corresponding HDMI input jack of a compatible equipment like

a HDTV, a projector or an A/V Receiver.

• Dolby TrueHD, Dolby Digital Plus and DTS-HD Master Audio are

supported with maximum 7.1 channels when HDMI OUT is the

selected audio output port.

• Make sure to connect to an amplier or receiver with a built-in

(Dolby Digital, Dolby Digital Plus, Dolby TrueHD, Dolby Digital Plus,

DTS-HD Master Audio and other applicable formats) decoder to

playback applicable multichannel audio formats.

WARNING

Before connecting and disconnecting any HDMI cables, both the T 567

and the ancillary source must be powered OFF and unplugged from the

AC outlet. Failure to observe this practice may cause permanent damage

to all equipment connected via HDMI sockets.

IMPORTANT NOTICE

If your HDMI equipped TV is not capable of decoding DTS or Dolby

Digital Bitstream, set the T 567’s HDMI or Digital Output setting at the

“Audio Setup Menu” to “PCM Stereo”. There may be a rushing noise

heard if your TV is not capable of decoding the DTS (or Dolby Digital)

Bitstream; most TVs do not have this capability.

5 DIGITAL AUDIO OUT (COAXIAL, OPTICAL)

• The digital playback audio output signal is available at these ports.

• Connect the optical or coaxial digital OUT ports to the

corresponding S/PDIF digital input of an amplier, receiver,

computer soundcard or other digital processors.

6 COMPONENT VIDEO OUT

• Connect to the corresponding component video input of a

compatible equipment like a monitor/television, projector, A/V

receiver or processor.

• Be sure to observe consistency in connecting the appropriate Y, Pb,

Pr jacks to the corresponding sources/inputs. Do not rely purely on

the color coding of the jacks, which may not always be consistent

among brands.

IDENTIFICATION OF CONTROLS

REAR PANEL

ATTENTION!

Please make sure that the T 567 is powered o or unplugged before making any connections. It is also advisable to power down or unplug all associated

components while making or breaking any signal or AC power connections.

1 3 4 52 6

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 567 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 567

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info