Bedienungsanleitung NAD T 747 (Seite 22 von 42) (Englisch)

493497

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

Source

The T 747 is equipped with ten congurable Sources (Source 1 -10). The

settings for each Source are dependent on the congurations set forth in

the parameters for that particular Source window.

While at “Source” line item, use [ ] keys to toggle through the Sources.

NOTE

Source 4 is defaulted to iPod. For Source 4 to be changed and assigned

to other inputs, go to “iPod Setup” menu under the “Source Setup” menu.

At iPod Setup menu, set “Enabled” to “No” – you can now assign Source 4

to other inputs or settings as desired.

Enable

One can enable/disable a Source via this option. This is particularly useful

if only few Sources are used and one directly selects the Source from the

front panel, bypassing unused sources.

To enable or disable a particular Source, scroll to “Enable”, press [ ] and

then [ ] to select “Yes” or “No”.

Name

A new Name maybe assigned to a Source label. For example, if your DVD player

is attached to “Source 1”, it is possible to rename “Source 1” to “DVD”.

In order to rename the Source label, scroll to “Name”, press [ ] and then [ ]

to pick and select through the alphanumeric selections.

Press [ ] to move to the next character or back to the previous

character, and at the same time save the changes done on the current

character. The name can be as long as eight characters.

The new Name will be shown in the VFD as well as on the OSD.

Analog Audio

The T 747 has nine analog audio inputs including 7.1 input. These analog

inputs - Audio 1, Audio 2, Audio 3, Audio 4, Audio 5, Audio 6, 7.1 Input,

Audio Front and Audio MP can be variably assigned to each Source.

Scroll to “Analog Audio”, press [ ] and then [ ] to select and assign an

analog audio input to the particular Source. If “O” is selected, no incoming

analog audio signal is selected by the particular Source.

NOTE

An incoming digital signal present at the assigned digital input will always

take precedence over the assigned analog audio input, even if both are

present. To maintain the analog audio input for the particular Source, select

“O” at the “Digital Audio” setting of the same “Source” menu.

Gain

Gain adjustment allows all sources to play back at the same volume so you

don’t need to adjust the volume every time a new source is selected. It is

generally preferable to reduce the level of the loudest source rather than

making louder the softer sources.

Scroll to “Gain”, press [ ] and then [ ] to step through the desired level

from -12dB to 12dB.

Digital Audio

To take advantage of the T 747’s high performance surround and digital

audio circuitry, it is advisable that its Digital Audio inputs are selected.

There are ten Digital Audio inputs selectable for the T 747. They are the

following:

• HDMI 1, HDMI 2, HDMI 3, HDMI 4

• Optical 1, Optical 2, Optical Front

• Coaxial 1, Coaxial 2

Another option is “O” whereby no incoming digital audio signal is selected

by the particular Source.

NOTE

An incoming digital signal present at the assigned digital input will always

take precedence over the assigned analog audio input, even if both are

present. To maintain the analog audio input for the particular Source, select

“O” at the “Digital Audio” setting of the same “Source” menu.

Video

A specic video input can be assigned a particular Source. The following are

the assignable Video inputs:

• HDMI 1, HDMI 2, HDMI 3, HDMI 4

• Component 1, Component 2, Component 3

• S-Video 1, S-Video 2, S-Video 3, S-Video 4, S-Video Front

• Composite 1, Composite 2, Composite 3, Composite 4,

Composite Front

Another option is “O” wherein the particular Source is prompted not to

select any Video input.

A/V Presets

A particular Source can be assigned a stored Preset. The parameters set up

in the selected Preset number will be adopted into the particular Source it

is assigned (Please refer to the separate section on “A/V PRESETS” above for

further understanding of Preset settings).

Scrolling to “A/V Presets” and by pressing [ ] and then [ ] keys, a

Source could be assigned a Preset number ranging from Preset 1 to 5.

If it is desired not to assign the particular Source a Preset setting, select

“None”.

Trigger Out

The Trigger Out for a particular Source is dependent on the congurations

done in a separate menu on Trigger Setup (See “TRIGGER SETUP” below). If

Trigger output is assigned to “Source Setup” in the separate “Trigger Setup”

menu window, +12V will be available at +12V TRIGGER OUT port whenever

a Source with “Trigger Out” set to “Yes” is recalled.

Another option is “None” whereby the particular Source is not assigned any

Trigger Out.

OPERATION

USING THE T 747  SETUP MENU

ENGLISH FRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 747 Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 747

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info