Bedienungsanleitung NAD T 748 (Seite 8 von 40) (Englisch)

493496

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

1 FM ANTENNA TERMINAL

• Connect the supplied lead-type FM antenna to the FM antenna

input. Extend the lead. Experiment freely with your antenna

placement and orientation until you get the clearest sound and

lowest background noise. Fix the antenna in the desired position by

using thumb tacks, push pins or any suitable means.

AM ANTENNA TERMINAL

The AM loop antenna supplied with the T 748 (or a suitable

replacement) is required for AM reception.

• Connect the supplied AM loop antenna to these terminals. If an

external AM antenna is used, make connections to the AM and GND

terminals in accordance with the instructions supplied with the

antenna.

• Testing dierent positions for the antenna may improve reception;

vertical orientation will usually produce the best results. Antenna

proximity to large metal objects (appliances, radiators) may impair

reception, as will as attempts to lengthen the wire to the loop.

• Refer also to the item about ASSEMBLING THE LOOP ANTENNA at

the LISTENING TO AM/FM RADIO section of the OPERATION page.

2 AUDIO 1-2/VIDEO 1-2/S-VIDEO

• These comprise the T 748’s other sets of principal input. Connect

these S-Video, composite video, and analog audio input ports to

the corresponding output ports of source components such as DVD

players or cable/satellite boxes.

• AUDIO 2 IN and S-VIDEO IN are the assigned default ports for the

audio/video output of the separately sold NAD IPD (NAD IPD Dock

for iPod) 1, NAD IPD 2 and later variants.

3 MONITOR OUT

• Connect to the video input of a monitor/television using quality

dual-RCA cables designed for video signals.

4 AUDIO 3 IN/OUT

• Connect AUDIO 3 OUT to the corresponding analog audio input

of a recording component such as a cassette deck, CD recorder or

to an outboard audio/video processor. Connect AUDIO 3 IN to the

component’s corresponding analog audio output connectors.

• The signal present at the AUDIO 3 OUT is determined by the source

last selected via the front panel Source keys or the AVR 4’s input select

keys with the exception of Source 3 or Source 4. If the default settings

are maintained for both Source 3 and Source 4 (analog audio input is

AUDIO 3) and both their respective digital audio input is set to “O”,

there will be no output at AUDIO 3 OUT when Source 3 or Source 4 is

selected. This prevents feedback through the recording component

thereby preventing possible damage to your speakers.

5 COMPONENT VIDEO INPUT

• Connect the Component Video Input to Component Video output

of compatible source components, typically a DVD player, BD player,

digital cable box or other applicable components.

• Be sure to observe consistency in connecting the Y/Pb/Pr jacks to

the corresponding sources.

6 ZONE 2

• Send zone selected audio source to the corresponding audio input

of a separately located additional amplier or receiver (not supplied)

that can power its matching set of speakers.

• Use high quality patch cables to reduce noise pickup over long

distance runs.

IDENTIFICATION OF CONTROLS

REAR PANEL

SURR-B/ZONE2

ZONE 2

SURR-BACK/

ZONE 2

SURR-BACK/

ZONE 2

1 2 3 4 6 7 8 9

14 15

10 11 12 13

ATTENTION!

Please make sure that the T 748 is powered o or unplugged from the mains power source before making any connections. It is also advisable to power

down or unplug all associated components while making or breaking any signal or AC power connections.

ENGLISH PORTUGUÊSFRANÇAIS ESPAÑOL ITALIANO DEUTSCH NEDERLANDS SVENSKA РУССКИЙ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

NAD T 748 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von NAD T 748

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info